1.What are the common thicknesses of galvanized steel strip?
Generally, it is between 0.2mm and 3.0mm. Common ones are 0.25mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, etc. The allowable thickness deviation will vary according to the precision requirements. For example, for galvanized steel strip with a nominal thickness of 0.5mm, the allowable thickness deviation is ±0.03mm when the width is ≤250mm under higher precision.

2.What are the common widths of galvanized steel strip?
The range is usually 10mm-1450mm, and common widths include 100mm, 200mm, 300mm, 400mm, 500mm, 600mm, 800mm, 1000mm, 1200mm, etc. Different widths correspond to different allowable width deviations. For example, for strip steel with a nominal thickness of 0.25mm-0.40mm, when the width is ≥400mm-<700mm, the allowable width deviation is + 1.50mm.

3.What are the common lengths of galvanized steel strip?
The nominal length of galvanized steel sheets is generally between 1000mm and 8000mm. Steel strips are usually supplied in coils with an inner diameter of 508mm or 610mm.

4.What are the common coating thicknesses for galvanized steel strip?
The coating weight range for pure zinc coating is generally 50g/m²-600g/m². Recommended nominal coating weights include 60g/m², 80g/m², 100g/m², 120g/m², etc. It can also be expressed as 30/30, 40/40, etc., representing the coating weight of the upper and lower surfaces respectively.
5.What are the common markings of galvanized steel strip?
Processing Performance Designations: "PT" for general use, "JY" for mechanical bonding, "SC" for deep drawing, "CS" for ultra-deep drawing with aging resistance, and "JG" for structure.
Surface Structure Designations: "Z" for normal spangle, "X" for small spangle, "GX" for smooth-pass spangle, and "XT" for zinc-iron alloy.
Surface Quality Designations: Groups I and II are designated by "I" and "II," respectively.
Surface Treatment Designations: "L" for chromated, "Y" for oiled, and "LY" for chromated plus oiled.

