1.How does SECC compare to SGCC?
Galvanizing Process: SECC cold-rolled substrate + electrolytic deposition (electroplating), where the zinc layer is deposited via an electric current; SGCC hot-rolled/cold-rolled substrate + hot-dip galvanizing (immersing the steel in molten zinc).
Zinc layer thickness: SECC is thinner, with a typical thickness of 5-20μm (8-12μm is common), which can be precisely controlled; SGCC is thicker, with a typical thickness of 30-100μm (50-80μm is common), with greater thickness variation.
Corrosion Resistance Principle: SECC zinc layer provides physical insulation (thin, limited insulation capability) and sacrificial anodic protection (thin zinc layer consumes quickly); SGCC zinc layer provides physical insulation (core advantage, strong insulation capability) and sacrificial anodic protection (thick zinc layer, long protection period).

2.How is the corrosion resistance ranked in a highly corrosive outdoor environment?
SGCC (hot-dip galvanizing) > GA (galvannealing) > SECC (electrolytic galvanizing)
Core reason: Both SGCC and GA are resistant to white rust (zinc oxidation), but if SECC is not passivated, large areas of white rust will appear in 1-2 months, affecting the appearance and lifespan; if SECC undergoes "color passivation" (such as chromate passivation), the corrosion resistance can be improved, but it is still not as good as the former two.

3.In a dry indoor environment, how is the corrosion resistance ranked?
SGCC ≈ GA > SECC
Core reason: There are fewer corrosive media in a dry environment, and the zinc layers of the three types of galvanized steel are not easily consumed. The thin zinc layer of SECC can also meet the use requirements of 5-10 years (such as computer cases and internal brackets of home appliances).

4.In a dry indoor environment, how is the corrosion resistance ranked?
SGCC ≈ GA ≈ SECC
Core reason: There are fewer corrosive media in a dry environment, and the zinc layers of the three types of galvanized steel are not easily consumed. The thin zinc layer of SECC can also meet the use requirements of 5-10 years (such as computer cases and internal brackets of home appliances).
5.What are the core characteristics of SECC corrosion resistance?
"Scenario-Limited" Corrosion Resistance: Suitable only for dry indoor environments. Wet/outdoor environments require additional coating (e.g., powder coating, painting) or passivation, otherwise corrosion resistance will be significantly reduced.
"Auxiliary Dependency" Corrosion Resistance: Due to its thin zinc layer, corrosion resistance relies on subsequent processing (e.g., passivation, painting). When used alone, its corrosion resistance is weaker than that of hot-dip galvanized products.
"Cost-Performance Balance": SECC's advantages include a smooth surface, high precision (cold-rolled base plate), and lower cost than SGCC/GA. It is suitable for applications requiring high appearance and formability but low corrosion resistance. It cannot replace hot-dip galvanized steel in corrosive environments.

