Customized Zero Spangle Zinc Coated Dx51d Dx52D Yx35-125-750 Galvanized Corrugated Steel Plate

Feb 12, 2026 Leave a message

What are the common specifications for DX52D light steel keel?

A: Vertical keel: 50/75/100 type, thickness 0.5–0.6mm; Horizontal keel: 38/50 type, thickness 0.5mm; Acceptance according to GB 50210, suitable for gypsum board/calcium silicate board partitions.

How to choose the wave height/wave pitch of DX52D profiled sheet?

A: Roofing panels: wave height 35–75mm, wave pitch 150–300mm, the larger the span, the higher the wave height; Wall panels: wave height 15–35mm, prioritizing flatness and decorative appearance.

Can DX52D be used for temporary buildings?

A: Very suitable; 0.4–0.5mm + Z80 is sufficient, quick installation, recyclable, suitable for container houses, prefabricated houses, and construction site fencing.

What are the processing precautions for DX52D?

A: ① Cold working: Bending radius ≥ 1.5t (t is plate thickness) to avoid cracking of the galvanized layer; ② Cutting: Shearing/sawing is preferred; plasma cutting requires grinding to remove the zinc coating; ③ Avoid scratches from hard objects; scratches should be repaired with zinc-rich paint.

What are the connection methods for DX52D components?

A: ① Self-tapping screws/rivets (enclosures/ductwork, commonly used); ② Bolt connection (light steel frame, washers required); ③ Welding (gutters/ductwork interfaces, zinc plating after welding); Spot welding is prohibited as it easily burns through the galvanized layer.