What is the yield strength range of DC01?
A: The yield strength is between 130 and 260 MPa. The moderate yield strength prevents cracking during cold working due to excessive strength.
What is the elongation after fracture requirement for DC01?
A: Elongation after fracture ≥28%. This high elongation provides good plastic deformation capacity, making it suitable for bending, stamping, and other processes.
What are the corresponding Chinese national standard (GB), Japanese national standard (JNS), and American national standard (ANS) grades for DC01?
A: The GB grades correspond to Q195 and Q215, the JNS grade to SPCC, and the ANS grade to ASTM A1008M CS.
What is the core difference between DC01 and DC03?
A: The two differ in deep drawing performance and mechanical properties. DC03 has a lower yield strength (120-240 MPa) and a higher elongation after fracture (≥32%), making its deep drawing performance superior to DC01. DC01 is only suitable for simple forming, while DC03 can meet more complex deep drawing requirements.
Can DC01 be used for deep drawing? A: No, it is not suitable for complex deep drawing. It is only suitable for simple forming processes such as bending and embossing. For complex deep drawing, DC03 or higher grade steel should be selected.

