In global steel trade, DC01 (EN), SPCC (JIS), and ASTM A1008 (ASTM) are among the most commonly requested cold rolled low-carbon steel grades. While they are often treated as equivalent materials, there are important differences in standards, mechanical requirements, ordering practices, and buyer expectations that international traders must understand.
This article explains the real differences and similarities between DC01, SPCC, and ASTM A1008 from a commercial and technical perspective, helping importers and exporters avoid specification risks.
Overview of the Three Standards
| Standard | Region | Grade Name | Typical Use |
|---|---|---|---|
| EN 10130 | Europe | DC01 | General cold forming |
| JIS G 3141 | Japan / Asia | SPCC | Commercial quality |
| ASTM A1008/A1008M | USA / Global | CS Type B | Commercial steel |
All three are:
Cold rolled
Low carbon
Non-alloy
Designed for general forming, stamping, and fabrication
Chemical Composition Comparison (Typical)
| Grade | C (%) | Mn (%) | P (%) | S (%) |
|---|---|---|---|---|
| DC01 | ≤ 0.12 | ≤ 0.60 | ≤ 0.045 | ≤ 0.045 |
| SPCC | ≤ 0.15 | ≤ 0.60 | ≤ 0.100 | ≤ 0.035 |
| ASTM A1008 CS B | ≤ 0.15 | ≤ 0.60 | ≤ 0.030 | ≤ 0.035 |
Trade insight:
DC01 has the strictest phosphorus control, making it preferred by EU buyers.
SPCC allows higher P but is widely accepted in Asia.
ASTM A1008 focuses more on performance than chemistry alone.
Mechanical Properties (Typical Range)
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation |
|---|---|---|---|
| DC01 | ≤ 280 | 270–410 | ≥ 28% |
| SPCC | ≤ 240 | 270–410 | ≥ 30% |
| ASTM A1008 CS B | Not fixed | 270–410 | ≥ 28% |
Key difference:
ASTM A1008 does NOT strictly limit yield strength unless specified.
DC01 and SPCC control yield more tightly, which matters for forming consistency.
Ordering Method: A Critical Trade Difference
DC01 (EN 10130)
Ordered by grade
Mechanical limits defined in the standard
Common in EU public tenders and OEM supply chains
SPCC (JIS G 3141)
Ordered by grade
Widely accepted in Asia, Middle East, and Africa
Often used as a reference grade in international RFQs
ASTM A1008
Ordered by type:
CS Type A / B / C
DS (Drawing Steel)
DDS (Deep Drawing Steel)
Buyer must specify:
Type
Thickness
Surface
Temper
Formability Comparison
| Application | Best Choice |
|---|---|
| Light bending | All three |
| General stamping | DC01 / SPCC |
| Automotive inner parts | ASTM A1008 DDS |
| Appliance panels | DC01 or SPCC |
Rule of thumb:
DC01 ≈ SPCC ≈ ASTM A1008 CS Type B for commercial forming
For deeper draws, ASTM offers clearer grade separation (DDS, EDDS)
Which Grade Should You Choose for Export?
Choose DC01 if:
Exporting to Europe
Customer requires EN compliance
Surface quality and consistency are critical
Choose SPCC if:
Trading in Asia, Middle East, or Africa
Customer prefers JIS terminology
Cost efficiency is a priority
Choose ASTM A1008 if:
Supplying North America
Automotive or appliance customers
Performance-based ordering is required
GNEE Steel: One Material, Multiple Standards
With over 15 years of international steel export experience, GNEE Steel supplies cold rolled steel coils and sheets fully compliant with:
EN 10130 DC01–DC06
JIS G 3141 SPCC/SPCD/SPCE
ASTM A1008 CS / DS / DDS
We provide:
Multi-standard MTCs
OEM & ODM support
Custom surface and temper control
Global logistics solutions
Conclusion
While DC01, SPCC, and ASTM A1008 are functionally similar, their standards philosophy, ordering rules, and buyer expectations differ significantly. Understanding these differences is essential for smooth international trade, contract compliance, and cost control.
If you need help selecting the right equivalent grade for your market, GNEE Steel is ready to support you.
GNEE Steel also supplies a variety of Cold rolled steel plates, such as DC01,DC03,DC04,DC05,DC06,DC07,SPCC, SPCD,SPCE,SPCF,ST12,ST13,ST14,ST15etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to sale@gneegi.com. You are welcome to consult us, and we are very willing to answer your questions.
What is the difference between DC01 and DC04 steel?
DC04 and DC01 are both cold-rolled, unalloyed quality steels that are used for various industrial applications. While DC01 serves as the standard grade for general cold forming processes, DC04 is characterized by improved deep-drawing properties and higher ductility.
Is DC01 the same as CR4?
Cold Reduced steel
Here at GNEE Steel, we stock and process DC01 mild steel (often referred to as CR4), in varying thicknesses from 0.9mm up to 3mm. Each sheet is de-coiled and flattened to strict tolerances in our works, ensuring consistent quality and flatness, every time.
What does DC01 mean?
DC01 represents the basic grade of the DC steel family and is also known under the former designations St12 or FeP01. This grade can be used for simple forming operations such as bending, coining, beading and drawing.
What is the difference between DC01 and DC03?
DC01 – This grade can be used for simple forming work, e.g. bending, embossing, beading and drawing. DC03 – This grade is suitable for forming requirements such as deep drawing and difficult profiling.
What is DC01 steel equivalent to?
Material 1.0330, DC01 steel equivalent to ASTM, ISO, European (German DIN, British BSI, France NF), Japanese JIS and Chinese GB standard (for reference). Note: DIN 1623 has been replaced by DIN EN 10130, and the designation ST12 has been replaced by DC01.
What is the thickness of DC01 material?
Galvanized Steel Sheet - Grade Dc01, Thickness 0.2-3.50mm, Width 914-1250mm | Cold Rolled, Durable Zinc Coating, Long Lasting Toughness.
Is cold-rolled steel better than hot rolled steel?
Cold rolling produces steel with closer dimensional tolerances and a wider range of surface finishes than hot rolling. It is also up to 20% stronger than hot rolled through the use of strength hardening.

