DC03 cold rolled steel coil (Material No. 1.0347) is a drawing-quality, low-carbon steel grade specified under DIN EN 10130. Compared with commercial-grade DC01, DC03 offers improved ductility and formability, making it an ideal material for light to medium drawing applications where stable performance and surface quality are required.
As a professional cold rolled steel supplier, GNEE STEEL provides DC03 steel coils and sheets with consistent quality, customized specifications, and reliable global delivery.
What Is DC03 Cold Rolled Steel?
DC03 is a non-alloy, low-carbon cold rolled steel designed for drawing applications. It is produced by cold rolling hot rolled steel, followed by annealing to improve grain structure and elongation.
Standard: EN 10130
Steel number: 1.0347
Quality level: Drawing quality
Delivery condition: +CR (cold rolled), +A (annealed)
DC03 bridges the gap between DC01 (commercial quality) and DC04 (deep drawing quality), offering balanced cost and formability.
DC03 | 1.0347: Properties according to DIN EN 10 130
Steel type
| Short designation | VDA239-100* | Material number |
| DC03 | CR2 | 1.0347 |
DC03 | 1.0347: Mechanical properties (transverse)
| Yield strength1) Re MPa max. | Tensile strength Rm MPa | Elongation at fracture2) % min. A80 | Anisotropy r903)4) min. | Strain hardening exponent n903) min. |
| 240 | 270-370 | 34 | 1.3 | - |
DC03 | 1.0347: Chemical composition (heat analysis)
| Percentage by weight % max. | ||||
| C | P | S | Mn | Ti |
| 0.10 | 0.035 | 0.035 | 0.45 | - |
Typical Applications of DC03 Cold Rolled Steel Coil
GNEE's DC03 cold-rolled steel coil (material number: 1.0347) is a high-performance grade complying with DIN EN 10130 standards, featuring superior deep drawability and ductility compared to basic DC01 grade. Leveraging its stable mechanical properties, excellent formability, and uniform surface quality, it has become a preferred choice in multiple key industries requiring complex forming processes:
Automotive Industry
Widely applied in shallow to medium deep-drawing components, including interior parts (precision door linings, integrated dashboard brackets), exterior parts (outer door panels, fenders), and functional structural parts (fuel tank shells, radiator upper brackets). Its elongation rate ≥34% and yield strength of 120-210 MPa effectively reduce cracking risks during complex stamping, fully meeting the automotive industry's strict requirements for forming precision, dimensional stability, and reliability.
Home Appliances
Serves as the core material for mid-to-high-end appliance components, such as refrigerator curved door panels, washing machine inner drums, air conditioner evaporator shells, and microwave oven inner liners. The smooth surface (Ra≤0.6μm) ensures excellent adhesion of subsequent paint or coating processes, while its outstanding deep drawability supports diverse and personalized appliance designs, enhancing product appearance and usability.
Metal Furniture & Office Equipment
Processed into high-quality products like curved table frames, integrated file cabinet bodies, and multi-functional storage shelves. It combines strong durability, good weldability, and excellent bending performance-able to withstand complex shaping processes without deformation. The uniform material structure also ensures consistent aesthetic effect of finished products, suitable for both civilian and commercial high-end furniture scenarios.
Electrical & General Fabrication
Ideal for precision components such as electrical control enclosures, high-precision distribution boxes, hardware accessories with complex shapes, and small mechanical stamping parts. It adapts perfectly to both small-batch customized production (for special-shaped components) and large-scale mass production (for standard parts), with stable performance that guarantees product qualification rate and production efficiency.
DC03 vs DC01 vs DC04 – Key Differences
| Grade | Steel No. | Formability | Typical Use |
|---|---|---|---|
| DC01 | 1.0330 | Basic | Simple bending |
| DC03 | 1.0347 | Medium | Drawing & stamping |
| DC04 | 1.0338 | High | Deep drawing |
DC03 is preferred when DC01 is insufficient for forming, but DC04 would be unnecessarily costly.
Surface Quality & Finish Options
DC03 cold rolled steel coils supplied by GNEE STEEL are available with:
Surface quality: Normal (A) / Improved (B)
Finish: Bright / Matt
Surface condition: Oiled / Dry
Edge: Mill edge / Slit edge
The smooth surface is suitable for painting, powder coating, electroplating, and galvanizing.
Advantages of Choosing DC03 Steel from GNEE STEEL
Founded in 2008, GNEE STEEL has extensive experience in supplying cold rolled steel to global markets.
Our advantages include:
Stable mills & strict quality control
Competitive export pricing
Fast production & delivery schedules
Technical support for forming applications
Export to EU, Middle East, Southeast Asia, Africa, and South America
Corporate philosophy:
"Make progress a little every day."
Conclusion
DC03 Cold Rolled Steel Coil (1.0347) is an ideal solution for manufacturers seeking reliable drawing performance without the cost of deep drawing grades. With consistent quality, flexible specifications, and professional service, GNEE STEEL is your trusted partner for DC03 cold rolled steel supply.
📩 Contact GNEE STEEL today for pricing, technical consultation, and customized DC03 steel solutions.
What is the difference between DC01 and DC03 steel?
DC01 can be used for simple forming work, for example Bending, embossing, beading and pulling. DC03 is suitable for forming requirements like Deep drawing and difficult profiles suitable.
What is DC03 steel?
DC03 is a low-carbon steel characterized by excellent cold formability. The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur.
What standard does GNEE's DC03 cold-rolled steel coil (1.0347) comply with?
GNEE's DC03 cold-rolled steel coil (material number: 1.0347) strictly adheres to the DIN EN 10130 standard, which is the European benchmark for cold-rolled low-carbon steel for cold forming. This compliance ensures consistent chemical composition, mechanical properties, and surface quality, making it suitable for global applications and international trade.
How is DC03 (1.0347) different from DC01 steel coil?
Compared to DC01 (the basic grade), DC03 (1.0347) offers superior deep drawability and ductility. Key differences include: DC03 has an elongation rate of ≥34% (vs. DC01's ≥28%) and a lower yield strength range (120-210 MPa vs. DC01's 140-280 MPa). This makes DC03 ideal for complex forming processes (e.g., shallow to medium deep drawing) in automotive and home appliance industries, while DC01 is better for simple bending or stamping.
What are the key mechanical properties of DC03 (1.0347) steel coil?
GNEE's DC03 (1.0347) features stable mechanical properties optimized for cold forming:
Yield Strength: 120-210 MPa
Tensile Strength: 270-350 MPa
Elongation (A80): ≥34%
Surface Roughness (Ra): ≤0.6 μm
These properties minimize cracking risks during complex stamping and ensure dimensional stability of finished products.
Can DC03 (1.0347) be used for automotive deep-drawing components?
Yes, it is an excellent choice for automotive shallow to medium deep-drawing parts. Typical applications include outer door panels, fenders, fuel tank shells, dashboard brackets, and radiator upper brackets. Its high elongation (≥34%) and low yield strength effectively withstand complex deformation, meeting the automotive industry's strict requirements for forming precision and reliability.
Does GNEE provide quality certificates for DC03 (1.0347) steel coil?
Absolutely. We provide EN 10204 Type 3.1 material test certificates for all DC03 (1.0347) shipments. This certificate includes actual test results of chemical composition, mechanical properties, and surface quality, certified by GNEE's quality department to ensure compliance with DIN EN 10130 standards-critical for customs clearance and downstream production quality control.
What is the minimum order quantity (MOQ) for DC03 (1.0347) steel coil?
The standard MOQ for GNEE's DC03 (1.0347) cold-rolled steel coil is 3 tons (per coil). For bulk orders (over 50 tons), we offer preferential pricing. We also accept small-batch orders (below 3 tons) for sample testing or trial production to support customers' initial project needs.
Can GNEE customize the specifications of DC03 (1.0347) steel coil?
Yes, we provide comprehensive customization services. Standard specifications include:
Thickness: 0.10-6.0 mm (customizable to 0.08 mm for special needs)
Width: 800-1500 mm (slitting to narrow widths available)
Coil Weight: 3-25 tons (adjustable based on shipping or production requirements)
Additionally, we offer surface treatments such as skin passing to enhance flatness and paint adhesion.
What is the lead time for DC03 (1.0347) steel coil orders?
For standard specifications in stock, the lead time is 7-10 working days (from order confirmation to shipment). For customized orders or bulk quantities (over 100 tons), the lead time is 15-20 working days, depending on production scheduling. We prioritize urgent orders and provide real-time production updates to ensure on-time delivery.
Is DC03 (1.0347) suitable for home appliance components requiring painting?
Yes. DC03 (1.0347) has a smooth, scale-free surface (Ra≤0.6 μm) that ensures excellent adhesion of paints, coatings, or galvanizing layers. It is widely used for mid-to-high-end home appliance parts such as refrigerator curved door panels, washing machine inner drums, and air conditioner evaporator shells. The uniform material structure also guarantees consistent coating quality across the entire coil.

