The DC family at a glance
Cold-rolled steel plates and coils under EN 10130 are widely used in industries that need excellent surface quality, dimensional accuracy and forming performance. DC01, DC03, DC04, DC05 and DC06 represent different cold-rolled drawing steel grades, distinguished mainly by formability and deep-drawing capability. The grade number rises with forming severity: DC01 for simple bending, DC03 for deep drawing, DC04 for high forming requirements, DC05 for higher requirements and DC06 for the highest. DC07 sits above DC06 for extreme forming requirements.
Chemistry and mechanical properties
| Grade | C max (%) | Mn max (%) | Rp0.2 (MPa) | Rm (MPa) | A80 min (%) |
|---|---|---|---|---|---|
| DC01 | 0.12 | 0.60 | 140-280 | 270-410 | 28 |
| DC03 | 0.10 | 0.45 | 140-240 | 270-370 | 30 |
| DC04 | 0.08 | 0.40 | 120-210 | 270-350 | 34 |
| DC05 | 0.06 | 0.35 | 120-180 | 270-330 | 36 |
| DC06 | 0.02 | 0.30 | 120-180 | 270-350 | 38 |
Values for the common thickness range of 0.7-3.0 mm per EN 10130. The trend is clear: as the grade number rises, carbon falls, yield strength falls and elongation rises, which is exactly what deeper drawing requires.
How to select the right DC grade
Work backwards from the part. If the part is bent, folded or roll-formed with no deep drawing, DC01 is the economic choice. If a drawing die is involved and DC01 cracks at the corners, move to DC03. For deep drawn housings and one-piece drawn parts, DC04 is the standard answer, with its specified r and n values. When the drawing is severe, such as inner panels of cars, choose DC05 or DC06; DC06 is the material for the most complex stampings and is specified when the r-value must be high and thinning must be minimal. A forming trial on the actual coil is the most reliable verification before mass production.
Plate vs coil supply formats
Cold-rolled material in this family is supplied as coil, slit strip or cut-to-length sheet and plate. Typical cold-rolled thicknesses run from 0.3 mm to 3.0 mm; above that, hot-rolled product is normally the substrate. Buyers should state the format, dimensions, tolerance class, surface quality class and edge condition, because these drive both price and downstream processing behavior.
Applications by grade
Automotive: interior body components, brackets and structural reinforcements use DC01-DC04; complex panels and deep drawn parts use DC05 and DC06. Home appliances: washing machine drums, refrigerator liners and air conditioner housings use DC03-DC06 depending on drawing depth. Electrical equipment and precision fabrication: enclosures and stamped parts use DC01-DC04. In every case the surface quality and dimensional accuracy of the cold-rolled product are as important as the forming grade.
Procurement checklist
For each order confirm: standard and grade (EN 10130 DC01-DC06); thickness, width, length or coil weight; tolerance and surface quality class; delivery condition (annealed, skin-passed, oiled or dry); and documentation, in particular the mill test certificate with chemistry and mechanical results. International suppliers with ISO 9001 quality systems can provide the batch traceability that end customers audit.
Frequently Asked Questions
What do the designations DC01 to DC06 mean? DC stands for cold rolled flat products for cold forming in the European designation system, and the number indicates the grade within the family, increasing with forming capability. There is no connection to strength ranking; higher numbers mean softer, more formable steel.
Which grade should I choose for bending? DC01. Bending, folding and roll forming impose moderate deformation, and DC01 handles them reliably at the lowest cost.
Which grade for deep drawn parts? Start with DC04. If trials show cracking, move to DC05 or DC06. DC03 may be enough for moderate draws. The deciding factor is the draw depth and corner radius of the part.
Are all DC grades weldable? Yes. All grades from DC01 to DC06 weld well, and the low carbon content, particularly in DC05 and DC06, gives excellent resistance-welding behavior.
What thickness range is available as plate? Cold-rolled plate in this family is commonly available from 0.3 mm to 3.0 mm. Thicker material is supplied as hot-rolled plate, which has a different surface and tolerance profile.
Do the DC grades come with different surface qualities? Yes. EN 10130 defines surface quality classes A, B and C for uncoated product. Class A is for visible surfaces, class B for painted or hidden parts, and class C for parts where surface is not critical.

