Dx51d Dx52D Dx53D Z275 Zinc Coated Roll Price Galvanized Steel Coil for Roofing

Nov 05, 2025 Leave a message

What does the designation DX51D+Z steel coil mean?

A: "DX51D" is a European standard cold-rolled low-carbon steel base material grade, representing good cold workability and moderate strength. "+Z" indicates hot-dip galvanizing. If suffixed with numbers such as Z100 or Z275, it represents a zinc layer weight of 100g and 275g per square meter, respectively.

What standards does DX51D+Z steel coil conform to?

A: It mainly conforms to the European standard EN 10346, while also being compatible with international standards such as ASTM A653. In domestic applications, GB/T 2518 specifications for hot-dip galvanized steel sheets and strips are often referenced.

What is the relationship between DX51D+Z and SGCC grades?

A: Their properties are similar. DX51D+Z corresponds to the European standard, while SGCC is a Japanese standard hot-dip galvanized steel grade. Both are low-carbon hot-dip galvanized materials and are often used interchangeably in general applications.

What are the core steps in the production process of DX51D+Z steel coils?

A: The core steps are: uncoiling → welding → pretreatment → annealing furnace heating → hot-dip galvanizing in a zinc bath → cooling → finishing → passivation and oiling → coiling. Some processes may be adjusted according to surface requirements.

What is the typical zinc layer thickness of DX51D+Z steel coils?

A: The standard zinc layer weight ranges from 20 to 275 g/m², corresponding to a thickness of approximately 3 to 39 μm. Common specifications include Z80, Z100, and Z275, which can be selected based on corrosion resistance requirements.