DX53D/SGCD2/SGCD3 Galvanized Sheet

Dec 23, 2025 Leave a message

Product Description

 

DX53D galvanized steel sheet is a hot-dip coated steel product featuring a continuous zinc layer on the surface. The zinc coating provides reliable corrosion protection, effectively isolating the steel substrate from moisture, air, and other corrosive environments, thereby significantly extending the service life of the material.

 

This grade offers excellent forming and processing performance. DX53D galvanized sheets are well suited for cutting, bending, stamping, welding, drilling, and other secondary fabrication processes.

 

DX53D galvanized steel sheet

 

During forming operations, the coating maintains good adhesion, reducing the risk of cracking or peeling. In addition, the galvanized layer enhances surface hardness and wear resistance, improving durability during handling and use.

 

Due to its balanced combination of corrosion resistance, formability, and mechanical performance, DX53D / SGCD2 / SGCD3 galvanized steel sheets are widely used in the construction industry.

 

Typical applications include light steel structures, support brackets, frames, and building components, helping to improve structural stability while lowering long-term maintenance requirements.

 

Scope of Application

 

Galvanized steel products are extensively used across a wide range of industries, including:

Industrial manufacturing

Agriculture, animal husbandry, and fisheries

Energy and power generation

Transportation and logistics

Chemical processing

Light industry and consumer goods

Home appliances

Building and construction

Telecommunications

National defense and infrastructure projects

 

Product Parameters

 

Product Name
DX53D / SGCD2 / SGCD3 Galvanized Steel Sheet

Thickness Range
0.12 mm – 6.00 mm

Width Range
600 mm – 1500 mm

Length
1 m – 12 m (custom lengths available)

Standards
AISI, ASTM, DIN, JIS, GB, EN, SUS, and other international standards

Zinc Coating Weight

Hot-dip galvanized: 60 – 275 g/m²

Pre-galvanized: 80 – 275 g/m²

 

Chemical Composition (Typical, %)

 

Cold Forming Grades – EN / Chinese Standard

Grade C Si Mn P S Ti
DX51D+Z ≤0.12 ≤0.50 ≤0.60 ≤0.100 ≤0.045 ≤0.30
DX52D+Z ≤0.12 ≤0.50 ≤0.60 ≤0.100 ≤0.045 ≤0.30
DX53D+Z ≤0.12 ≤0.50 ≤0.60 ≤0.100 ≤0.045 ≤0.30
DX54D+Z ≤0.12 ≤0.50 ≤0.60 ≤0.100 ≤0.045 ≤0.30
DX56D+Z ≤0.12 ≤0.50 ≤0.60 ≤0.100 ≤0.045 ≤0.30
DX57D+Z ≤0.12 ≤0.50 ≤0.60 ≤0.100 ≤0.045 ≤0.30

 

Cold Forming Grades – Japanese Standard (JIS)

Grade C Si Mn P S Ti
SGCC ≤0.15 ≤0.50 ≤0.80 ≤0.050 ≤0.030 ≤0.025
SGCD1 ≤0.12 ≤0.50 ≤0.60 ≤0.040 ≤0.030 ≤0.025
SGCD2 ≤0.10 ≤0.50 ≤0.45 ≤0.030 ≤0.030 ≤0.025
SGCD3 ≤0.08 ≤0.50 ≤0.45 ≤0.030 ≤0.030 ≤0.025
SGCD4 ≤0.06 ≤0.50 ≤0.45 ≤0.030 ≤0.030 ≤0.025

 

Structural Grades – Japanese Standard

Grade C Si Mn P S Ti
SGC340 ≤0.25 ≤0.50 ≤1.70 ≤0.200 ≤0.035 ≤0.025
SGC400 ≤0.25 ≤0.50 ≤1.70 ≤0.200 ≤0.035 ≤0.150
SGC440 ≤0.25 ≤0.50 ≤2.00 ≤0.200 ≤0.035 ≤0.150
SGC490 ≤0.30 ≤0.50 ≤2.00 ≤0.200 ≤0.035 ≤0.025
SGC510 ≤0.30 ≤0.50 ≤2.50 ≤0.200 ≤0.035 ≤0.025

 

Structural Grades – EN / AISI Standard

Grade C Si Mn P S Ti
S220GD+Z ≤0.20 ≤0.60 ≤0.70 ≤0.100 ≤0.045 ≤0.025
S250GD+Z ≤0.20 ≤0.60 ≤0.70 ≤0.100 ≤0.045 ≤0.025
S280GD+Z ≤0.20 ≤0.60 ≤0.70 ≤0.100 ≤0.045 ≤0.025
S320GD+Z ≤0.20 ≤0.60 ≤0.70 ≤0.100 ≤0.045 ≤0.025
S350GD+Z ≤0.20 ≤0.60 ≤0.70 ≤0.100 ≤0.045 ≤0.150
S550GD+Z ≤0.20 ≤0.60 ≤0.70 ≤0.100 ≤0.045 ≤0.150

 

Mechanical Properties

 

Grade Yield Strength (MPa) Tensile Strength (MPa) Elongation (%)
DX51D Z / ZM / AZ / AM 240–380 270–500 ≥22
DX52D Z / ZM / AZ / AM 140–300 270–420 ≥26
DX53D Z / ZM / AZ / AM 140–260 270–380 ≥30
DX54D Z / ZM / AZ / AM 120–220 260–350 ≥36
S220GD Z / ZM / AM ≥220 ≥300 ≥20
S250GD Z / ZM / AZ / AM ≥250 ≥330 ≥19
S280GD Z / ZM / AM ≥280 ≥360 ≥18
S300GD A / AM ≥300 ≥380 ≥18
S320GD Z / ZM / AM ≥320 ≥390 ≥17
S350GD Z / ZM / AZ / AM ≥350 ≥420 ≥16
S450GD A / AM ≥450 ≥480 ≥15
S550GD Z / ZM / AZ / AM ≥550 ≥550 -

 

Galvanized Surface Finish Options

 

Zero spangle

Minimized spangle

Regular spangle

Large spangle

 

Recommended Zinc Coating by Service Environment

 

Environment Recommended Coating
Indoor applications Z10 or Z12 (100–120 g/m²)
Suburban areas Z20 (200 g/m²) + painting
Urban / industrial areas Z27 (270 g/m²) or G90 + painting
Coastal environments ≥ Z27 (270 g/m²) or G90 + painting
Punching / deep drawing ≥ Z27 (270 g/m²) to prevent coating peeling

 

Surface Treatment Options

 

Code Description
C Chromate treatment, suitable for unpainted use
S Chromate treatment with oiling
P Phosphating with sealing, good paint adhesion
Q Phosphating with sealing and oiling
T Phosphating without sealing
V Phosphating without sealing, with oiling
O Oiled surface for temporary rust protection
M Untreated surface, suitable for immediate painting

 

Material Grade Comparison

 

China Japan Europe
DX51D Z / DC51D Z (CR) SGCC DX51D Z
DX52D Z / DC52D Z SGCD1 DX52D
DX53D Z / DC53D Z / DX54D Z SGCD2 / SGCD3 DX53D / DX54D
S220–S550GD Z SGC340–SGC570 S220–S550GD Z
DX51D Z / DD51D Z (HR) SGHC DX51D Z

 

Contact now

 

info-576-573

 

Q1: What is DX53D+Z steel?
DX53D+Z is a continuously hot-dip galvanized cold-rolled low carbon steel grade defined in EN 10346. "DX53D" refers to the base steel with enhanced formability, while "+Z" indicates a zinc coating applied on both sides to provide corrosion protection.

 

Q2: Which standard governs DX53D+Z steel?
DX53D+Z is produced in accordance with EN 10346, which specifies requirements for continuously hot-dip coated flat steel products, including chemical composition, mechanical properties, coating mass, surface quality, and dimensional tolerances.

 

Q3: What mechanical properties can be expected from DX53D+Z?
DX53D+Z typically offers a tensile strength in the range of approximately 270–410 MPa, with a low yield strength and a minimum elongation of about 23% (A80), making it suitable for forming, bending, and moderate deep-drawing applications.

 

Q4: How does DX53D+Z differ from DX51D+Z?
Compared with DX51D+Z, DX53D+Z generally provides improved formability and a more stable deformation behavior, making it better suited for parts that require more demanding shaping or complex forming operations.

 

Q5: What does the "+Z" coating designation mean?
The "+Z" symbol indicates a hot-dip zinc coating applied in a continuous galvanizing line. The coating provides sacrificial corrosion protection, helping to extend the service life of the steel in humid or mildly corrosive environments.

 

Q6: What zinc coating weights are commonly available for DX53D+Z?
Common zinc coating designations include Z10, Z15, Z20, Z25, and Z30, representing the total zinc mass on both sides in g/m². Higher coating weights provide increased corrosion resistance but may slightly affect formability.

 

Q7: Is DX53D+Z suitable for welding?
Yes, DX53D+Z exhibits good weldability using standard resistance welding and arc welding methods. However, appropriate ventilation and process adjustments are recommended due to zinc evaporation during welding.