Galvanized Steel sheet
Popular specifications are in short supply!
click to get the specification sheet!
Galvanized sheet is a steel sheet that has received a specific treatment consisting of hot galvanizing. As such, The steel is immersed in a zinc crucible, so that the sheets are fully covered with this metal.
Sometimes, depending on the specific sheet, the immersion may have been carried out in a zinc-iron alloy. In any case, when carried out hot, it fully adheres to the steel, so steel and bath become inseparable. This is especially the case in the case of the zinc-iron alloy, which prevents chipping to a greater extent.
Therefore, it presents an inner sheet of steel that constitutes the thickness of the sheet, but also a zinc coating which gives it that characteristic galvanization. Thus, the steel is fully protected from contact with external and atmospheric agents.
In any case, it has the same capacity to be cut, drilled and punched as any other type of steel sheet. The main difference is the presence of a new metal layer that acts as a protector for the steel body.
What is really sought with the galvanization of steel? There is no better way to answer this question than by presenting the advantages of this type of sheet, which derive from its coating.
Excellent corrosion protection. This allows its use in industries where it is treated with chemicals or harmful products.
Hermetic separation against external atmospheric agents. Therefore, it can remain outdoors for a long time.
Greater durability and resistance of the sheet. In this way, investing in it always ends up being profitable through amortization.
Increase in hardness. Prevents impact chipping and chipping.
Aesthetic appearance and regular appearance. In this way, they do not require too many subsequent finishes after installation.

Specifications:
|
Standard |
JIS G3302, EN10147, ASTM A653M |
|
Grade |
Commerical: SGCC, SGCH, DX51D |
|
Deep Drawn: DX52D, DX53D, DX54D, FS, DDS, SGCD, SGC |
|
|
Froming and Structrual Steel: S280GD, S320GD, S350GD, S400GD, S500GD, S550GD |
|
|
Zinc Coating |
Z30-400G/M2, G30, G60,G90, Z10, Z12,Z27 |
|
Spangle Model |
Zero Spangle, Small Spangle, Regular Spangle, Big Spangle |
|
Surface Treatment |
Chromated, Oiled, No-oiled |
|
Hardness |
Softy, Semi Hard, Full Hard, G550 |
|
Thickness |
0.11-4.00MM |
|
Width |
20-1800MM |
|
Coil Weight |
Coil Weight |
|
Coil Inner Diameter |
508MM or 610MM |
|
Package |
Standard Seaworthy Exporting Packing |
|
Transport Type |
Vessel Container, Vessel Bulk, Railway Container, Railway Wagon |
|
Loading Port |
Tianjin, Qingdao, Ningbo, Shanghai and other China's port |
|
Delivery Time |
15-25 Days after Receiving the Deposit |
|
Terms of Trade |
EXW, FOB, CFR, CIF |
|
Terms of Payment |
T/T and Irrevocable LC at Sight |
|
Production Capacity |
7000MT/Month |
Application:

Roofing, wall cladding, Structural steel, pre-painted panels
Car body components, chassis parts
Refrigerator back panels & air conditioner shells
Steel cabinet, shelf manufacturing
Ventilation ducts, chimney pipes, and flue systems
Electrical enclosures, distribution boxes
Ceiling panels, wall partitions
Toolboxes lighting fixtures metal craftwork
Greenhouse tubes, scaffold pipes, cable conduits
Cable tray supports & grounding accessories
C/Z structural purlins
Industrial packaging straps, steel bundling strips
Electronic frames and appliance brackets

