Galvanized Coil Types

Sep 10, 2025 Leave a message

1.What are the types of galvanized coils according to the core galvanizing process?

Hot-dip galvanized coil (GI): Cold-rolled or hot-rolled steel strip is immersed in molten zinc (approximately 450°C). The zinc reacts chemically with the steel strip surface, forming a composite coating of an iron-zinc alloy layer and a pure zinc layer.
Electrogalvanized coil (EG): With the steel strip as the cathode and zinc as the anode, zinc ions are deposited on the steel strip surface through electrolysis in an acidic or alkaline galvanizing bath, forming a pure zinc coating.
Alloyed hot-dip galvanized coil (GA): After hot-dip galvanizing, the strip undergoes an additional "alloying treatment" (heating to 550-600°C) to fully react the zinc layer with the iron substrate, forming an "iron-zinc alloy layer" (no pure zinc layer).

Galvanized Coil

2.What are the types of galvanized coils according to surface treatment methods?

Passivated Galvanized Coil
Process: A passive film (such as chromate passivation or chromium-free passivation) is formed on the surface of the zinc coating, with a thickness of only 0.1-1μm.
Oil-Coated Galvanized Coil
Process: A layer of rust-inhibiting oil (such as volatile or non-volatile) is applied to the surface of the zinc coating (or passivation layer).
Pre-Coated Galvanized Coil (PPGI/PPGL)
Process: An organic coating (such as polyester, epoxy, or fluorocarbon resin) is applied to the surface of the galvanized coil, typically in a two-layer "primer + topcoat" structure.
Phosphate-Coated Galvanized Coil
Process: A phosphate film (zinc phosphate/iron phosphate) is formed on the surface of the zinc coating, with a thickness of 1-5μm.

Galvanized Coil

3.What types of galvanized coils are there according to base material and performance?

Cold-rolled galvanized coil
Base material: Cold-rolled steel strip (smooth surface, high thickness accuracy, typically 0.15-3.0mm);

Hot-rolled galvanized coil
Base material: Hot-rolled steel strip (surface scale, requires pickling, thickness 3.0-12.0mm);

High-Strength Galvanized Coil
Performance: By adding alloying elements (such as Mn, Si, and P) or heat treatment, the base material yield strength can be increased to ≥345 MPa (e.g., HSLA steel).

Galvanized Coil

4.What are the types of galvanized coils according to appearance and zinc flower morphology?

Regular Spangle Galvanized Coil
Features: Visible "spangles" (hexagonal crystals ranging from a few millimeters to over ten millimeters in diameter) form on the surface, resulting in high gloss.
Applications: Applications requiring aesthetics (such as architectural decorations and guardrails). However, the edges of the spangles are prone to staining, and corrosion resistance is slightly lower than that of the Zero Spangle Galvanized Coil.
Zero Spangle Galvanized Coil
Processing: After hot-dip galvanizing, it undergoes a "sparkle treatment" (such as adjusting the cooling rate and adding trace elements) to inhibit spangle growth.
Features: A smooth, uniform silver-white surface with no visible spangles, making it easy to paint or laminate.
Applications: Appliance panels and automotive exterior panels requiring a refined appearance.
Minimized Spangle Galvanized Coil
This product is intermediate between the Spangle and Zero Spangle versions, with a spangle diameter of ≤1mm. It balances appearance and workability, and has similar applications to the Zero Spangle version.

 

5.What types of galvanized coils are there according to their special functions?

Fingerprint-Resistant Galvanized Coil
Process: Surface coating with an "anti-fingerprint coating" (e.g., organic resin + lubricant);
Function: Prevents finger marks while improving wear and stain resistance;
Applications: Appliance panels (e.g., refrigerator doors, microwave oven housings), electronic device housings.
Antibacterial Galvanized Coil
Process: Antimicrobial agents (e.g., silver ions, zinc ions) are added to the coating;
Function: Inhibits the growth of bacteria (e.g., Escherichia coli, Staphylococcus aureus), with an antibacterial rate of ≥99%;
Applications: Medical device housings, food processing workshop walls, kitchen appliances.
Self-Healing Galvanized Coil
Process: Microcapsules are added to the coating. When scratched, the microcapsules rupture and release the repair agent, filling the scratch;
Features: Extends coating life and reduces maintenance costs;
Applications: Outdoor components prone to scratching (e.g., public facilities, shipping containers).