Galvanized Pipe

Sep 15, 2025 Leave a message

Galvanized Pipe
Galvanized pipe refers to welded steel pipe with a hot-dip or electroplated zinc coating. This treatment increases the pipe's corrosion resistance and extends its service life. The following is a detailed introduction to galvanized pipe:
Classification
Hot-dip galvanized pipe: This process involves immersing the steel pipe in molten zinc, causing the zinc to react with the iron substrate to form an alloy layer, thus bonding the substrate and the coating. This coating provides a uniform, strong adhesion, and a long service life. The zinc layer is typically 80-100μm thick, with a slightly rough surface and spangles.
image
Cold-dip galvanized pipe: Also known as electrogalvanized pipe, this process uses an electrochemical method to coat the steel pipe with zinc. The zinc coating is minimal, typically 10-50g/m². The zinc layer is thin and easily detached, resulting in poor corrosion resistance. The surface is relatively smooth and shiny. Due to its backward technology, this process has been banned for use as water and gas pipes. Specifications
Nominal Diameter: Commonly used diameters range from DN15 to DN300. For example, DN25 corresponds to an outer diameter of 33.5mm (±0.5mm).
Wall Thickness: Generally ranges from 1.0 to 6.0mm, with a tolerance of ±10% permitted by the national standard.
Zinc Layer Weight: Hot-dip galvanized pipes must be ≥275g/m² (double-sided), which can be tested with a magnetic thickness gauge.
Mechanical Properties: Tensile strength of standard-grade galvanized pipes is ≥375MPa, while high-strength grades can reach over 500MPa.
Production Process
The main process flow is: black pipe → alkali cleaning → water cleaning → pickling → water rinsing → impregnation → drying → hot-dip galvanizing → external blasting → internal blasting → air cooling → water cooling → passivation → water rinsing → inspection → weighing → storage.
Connection Methods
Threaded connection: Galvanized steel pipes are delivered with threads machined after galvanizing. This is suitable for connecting smaller pipe diameters. Welding: Care should be taken to remove zinc nodules at the pipe ends to prevent welding difficulties and pinholes. This method is generally used for larger pipe diameters or where tight sealing is required.
Grooving: Grooves are rolled out on the ends of steel pipes using a grooving machine, and then connected using clamps. This method is convenient and commonly used for fire protection pipes, among other applications.
Applications
Construction: It can be used for structural support, scaffolding, water supply and drainage piping, heating pipes, and more.
Machinery: It is used in the production of various mechanical parts, especially those requiring high corrosion and wear resistance.
Chemical: It can be used for oil and natural gas pipelines, as well as for oil heaters and condenser coolers in chemical coking equipment.
Power: It is commonly used in cable protection conduits for power and telecommunications, as well as in piping systems for certain equipment.
Agriculture: It is widely used in the installation of water pipes for agricultural irrigation systems and the construction of greenhouse frameworks.