Here are some processing methods that can improve the hardness and yield strength of DC04 cold-rolled steel sheet.
To improve the hardness and yield strength of DC04 cold-rolled steel sheet, the internal structure can be modified by adjusting the processing technology (such as increasing dislocation density and refining grain size). Common methods are as follows:
Cold Rolling Deformation (Increasing the Reduction Ratio)
Further cold rolling of DC04 (increasing the rolling reduction ratio) increases the internal dislocation density and elongates and refines the grain size through mechanical deformation, significantly improving hardness and yield strength. A higher reduction ratio (e.g., increasing the original cold rolling ratio from 50% to 70%) increases the degree of deformation and the strengthening effect. However, it should be noted that excessive cold rolling can reduce the material's plasticity and may affect subsequent formability.
Low-Temperature Annealing (Aging Treatment)
Short-term annealing at relatively low temperatures (e.g., 150-300°C) can improve strength through "precipitation strengthening" or "dislocation pinning" mechanisms. For example, trace amounts of carbon and nitrogen atoms in steel can segregate around dislocations, forming Coriolis gas pockets that hinder dislocation motion and increase yield strength and hardness (this phenomenon is also known as "strain aging").
Surface Hardening
Carburizing/Nitriding: A chemical heat treatment forms a high-hardness carbide or nitride layer on the steel surface, significantly improving surface hardness and wear resistance while maintaining good toughness in the core.
Surface Quenching: Rapidly heating the steel surface and then cooling it to induce martensitic transformation in the surface layer (DC04 has a low carbon content, resulting in a thinner hardened layer), thereby increasing surface hardness.
Grain Refining: Controlled rolling processes (such as controlled rolling and controlled cooling) refine grains. According to the Hall-Page relationship, finer grains increase the yield strength and hardness of the material. For example, introducing multiple deformation passes during cold rolling combined with intermediate annealing can produce a finer grain structure.
Microalloying (Production Stage)
Trace alloying elements (such as niobium, titanium, and vanadium) are added during the steelmaking process. These elements form fine precipitates with carbon and nitrogen, enhancing the material's strength and hardness through both precipitation strengthening and grain refinement. This method must be implemented during the smelting process and is a strengthening method used during production.
Note: As a deep-drawing grade steel, DC04 is designed to maintain excellent ductility. Excessively increasing hardness and yield strength may result in reduced formability (e.g., cracking during stamping). In practical applications, the appropriate strengthening process and parameters must be selected based on the specific requirements, balancing strength and ductility.

