Hot dip galvanized steel coil
With the rapid development of technology, today's production and processing at the process level is also greatly enhanced, such as hot dip galvanizing is a common process treatment, simply look at the processed steel parts or castings, etc. immersed in molten zinc to form a layer of alloy plating, surface protection is obvious.

Hot dip galvanized steel coil is a steel sheet product in which a layer of zinc is coated on the surface of a ferrous substrate to improve its corrosion resistance and extend its service life.
From the point of view of the process characteristics of hot dip galvanizing, its own corrosion resistance is superior. Compared with other processes, the zinc-iron alloy layer formed by this process is more compact, more detailed, can effectively block the air and water, reducing the possibility of oxidation occurs, for steel and other protective effect is more obvious, effectively extend the service life.
Physical Barrier Protection: A complete zinc layer effectively isolates the steel substrate from oxygen, moisture, and other corrosive media in the air.
Dual Protection: The combination of sacrificial anodic protection and physical barrier protection provides extremely long-lasting corrosion protection, with a service life several or even dozens of times longer than ungalvanized steel.
Advantage
1.Good corrosion resistance: The galvanized layer can effectively prevent the steel from coming into contact with oxygen, moisture and other substances in the environment, thereby reducing the corrosion rate of the steel and extending its service life.
2.Good anti-oxidation performance: The galvanized layer can form a dense oxide film under the action of oxygen, which further protects the steel.
3.Good weather resistance: The galvanized layer can remain stable under various climate conditions, is not affected by wind and rain, and is suitable for various outdoor environments.

- Product Specifications
|
Name |
Galvanized Coil |
|
Standard |
EN10147,EN10142,DIN17162,JIS G3302,ASTM A653,JISG3302,ASTM A653M, EN10327,DIN17162,EN10142,EN10292 |
|
Grade |
DX51D,DX52D,DX53D,DX54D,S220GD,S250GD,S280GD,S350GD,S350GD,S550GD, SGCC,SGHC,SGCH,SGH340,SGH400,SGH440,SGH490,SGH540,SGCD1,SGCD2,SGCD3, SGC340,SGC490,SGC570,SQ CR22(230),SQ CR22(255),SQ CR40(275),SQ CR(340),SQ CR80(550),CQ,FS,DDS,EDDS,SQ CR33(230),SQ CR37(255),SQ CR40(275),SQ CE50(340),SQ CR80(550) or Customer's Requirement |
|
Thickness |
0.12-3.00mm or customer's requirement |
|
Width |
100mm-1500mm according to customer's requirement |
|
Type of Coating |
Hot Dipped Galvanized Steel(HDGI) |
|
Zinc Coating |
30-275g/m² |
|
Surface Treatment |
Passivation(C),Oiling(O),Lacquersealing(L),Phosphating(P),Untreated(U),Galvanized,PVC,Black and color painting,transparent oil,anti rust oil |
|
Packing |
Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing,side guard piate,then wrapped by seven steel belt or according to customer's requirement |

