Hot Dipped Galvalume Coated Color Steel Coil Q235 Galvalume Steel Coils

Jan 28, 2026 Leave a message

Q: What are the core processing steps for Q235 steel coils before construction?

A: Core processes: Leveling (from coil to flat sheet) → Cutting (plasma, flame, shearing) → Bending/stamping (forming components) → Welding → Anti-corrosion treatment (pickling, painting, galvanizing) → Inspection.

Q: What quality issues need attention when leveling Q235 steel coils on construction sites?

A: ① Control the precision of the leveling machine to prevent warping and wavy edges (affecting welding and installation); ② Thick coils (≥10mm) need to be leveled after leveling; ③ Deburr the cut edges to avoid scratches during construction.

Q: How weldable is Q235 steel coil, and what welding methods are commonly used on construction sites?

A: Excellent weldability; it is one of the easiest steels to weld in the construction industry, requiring no preheating (slight preheating is possible for thick plates ≥20mm before welding); manual arc welding and CO2 gas shielded welding are commonly used on site, suitable for the welding conditions of construction sites.

Q: What is the minimum bending radius for Q235 steel coils, and what precautions should be taken in construction processing?

A: The minimum bending radius for low-carbon steel Q235 coils is 0.5 to 1 times the thickness of the plate (0.5 times for thin coils, 1 time for thick coils). Avoid excessively small bending radii in construction processing to prevent cracking of the plate and affecting the strength of the components.

Q: What are the weld requirements for splicing Q235 steel coils in construction?

A: For non-load-bearing components, single-sided welding is used, with a weld height ≥ 0.7 times the plate thickness. For load-bearing components, double-sided welding is used, with a weld height ≥ the plate thickness, and weld inspection is required (no porosity, slag inclusions, or cracks).