Why choose Z275 galvanized steel coil?
1. Super strong anti-corrosion protection system
Zinc layer thickness: 275g/m² on both sides (180g/m² for conventional products in the industry)
Salt spray test: Passed 3000 hours of neutral salt spray test (ASTM B117 standard)
Service life: More than 40% longer than ordinary galvanized steel coils
2. Diversified surface treatment processes
| Surface type | Roughness (RA) | Applicable scenarios |
|---|---|---|
| Finished surface | 0.5-1.2μm | Home appliance panels, precision parts. |
| Zinc spangle surface | 1.5-2.5μm | Building exterior walls, industrial equipment. |
| Zinc spangle-free surface | ≤1.0μm | Automobile chassis, high-end decoration. |
3. Excellent processing performance
Elongation ≥18% supports various processing methods such as stamping, bending, welding, etc., and the scrap rate is reduced by more than 30%.
Technical parameters and specifications comparison table

| Item | Parameter Range | Test Standard |
|---|---|---|
| Substrate Thickness | 0.3-3.0mm | ±0.03mm |
| Roll Weight | 5-15 tons/roll | Electronic floor scale measurement |
| Hardness (HV) | 80-180 | Vickers hardness tester |
-
Applications
1. Building enclosure system
High-end factory metal roof, modular clean room wall panels, airport terminal decorative panels.
2. Home appliance manufacturing
Refrigerator/washing machine housing, air conditioner outdoor unit cover, oven liner components.
3. Automobile industry
Chassis protection parts, cargo box baffles, new energy vehicle battery trays.
4. Agricultural facilities
Greenhouse frames, livestock breeding equipment, grain storage systems.
5. Photovoltaic new energy
Solar support, inverter box, power station fence system.
- Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |
GNEE Steel Group has always followed international trade practices, adhering to the business philosophy of abiding by contracts, keeping promises, quality service, and mutual benefit. We are willing to sincerely cooperate with friends at home and abroad to develop together.


