How To Choose The Right S320GD Thickness For Your Project

Jan 22, 2026 Leave a message

S320GD galvanized steel

 

Galvanized steel is a type of steel protected by a zinc coating, which effectively resists corrosion and extends service life. It is widely used in automotive manufacturing, construction, industrial equipment, and home appliances.

 

Among them, S320GD is a high-strength structural galvanized steel. The "S" stands for structural steel, "320" means minimum yield strength of 320MPa, and "GD" indicates hot-dip galvanizing process suitability.

 

Looking for trusted S320GD galvanized steel manufacturers in China? You've come to the right place. As a direct factory with 20 years of structural steel experience, we supply EN 10346 compliantS320GD+Z sheets or coils at factory prices. In this guide, we'll help you select the right thickness and understand key performance parameters.

 

S320GD galvanized steel

S320GD galvanized steel

 

S320GD Chemical Composition and Mechanical Properties

 

The performance of S320GD is determined by its chemical composition and mechanical properties, which directly influence thickness selection.

Chemical Element (Wt%)

Content Range

Carbon (C)

≤0.25%

Silicon (Si)

≤0.6%

Manganese (Mn)

≤1.7%

Phosphorus (P)

≤0.1%

Sulfur (S)

≤0.045%

 

Mechanical Property

Value

Minimum Yield Strength

≥320MPa

Tensile Strength

360-510MPa (varies by thickness)

Elongation

≥20%

 

Common S320GD Thickness and Size Specifications

 

S320GD is available in a range of thicknesses, with 0.2mm-3.5mm being the most common. The right size ensures project safety and cost-effectiveness.

 

Thickness (mm)

Common Width (mm)

Length (Form)

Typical Application

0.2-0.5

500-1500

Coil

Home appliance casings

0.8-1.2

500-1500

Coil/Sheet

Automotive body panels

1.5-2.0

500-1500

Sheet

Automotive chassis parts

2.5-3.5

500-1500

Sheet

Building structural parts

Custom slitting and cutting services are available to match specific project dimensions.

 

Key Factors for S320GD Thickness Selection

 

Load-bearing capacity is the primary consideration. Heavier loads require thicker sheets to avoid deformation.

For automotive collision beams and chassis parts, 1.5-2.0mm thickness balances strength and weight.

Corrosion environment also matters. Thicker zinc coatings (Z120, Z180) pair with appropriate base thickness for harsh conditions.

Processing needs such as bending and stamping favor thinner sheets (0.8-1.2mm) for better formability.

 

Application-Specific S320GD Thickness Recommendations

 

In automotive manufacturing, body panels use 0.8-1.2mm S320GD+Z for corrosion resistance.

Building roof and wall panels adopt 1.0-1.5mm thickness to withstand weather and light loads.

Industrial equipment casings and cable trays often choose 1.2-2.0mm for durability.

Home appliance shells use 0.5-0.8mm to save cost while ensuring surface quality.

 

Choosing the right S320GD thickness is critical for project safety, performance, and cost control. Consider load, environment, and processing needs to make an informed decision. Check our S320GD product specs for detailed parameters, or contact us now to get a customized thickness recommendation and 2026 factory price quote!

 

Get extra 3% off + free sea freight quote!

Available Steel Grade

 

Steel grade Coating Yield(MPA) Tensile(MPA) Elongation(%)
DX51D Z,ZF -- 270-500 20
DX52D Z,ZF 140-300 270-420 22
DX53D Z,ZF 140-260 270-380 26
DX54D Z,ZF 140-220 270-350 30
S220GD Z,ZF 220 300 18
S250GD Z,ZF 250 330 17
S280GD Z,ZF 280 360 16
S320GD Z,ZF 320 390 15
S350GD Z,ZF 350 420 14
S400GD Z,ZF 400 470 --
S450GD Z,ZF 450 530 --
S500GD Z,ZF 500 560 --