Key Features and Advantages
Extreme Deep Drawability: Its extremely low yield strength and high elongation allow it to withstand deep drawing (e.g., drawing a flat plate into a deep cylindrical shape or complex curved surface) without cracking, making it the preferred material for complex stampings.
Uniform Mechanical Properties: Through a controlled rolling and cooling process, the material's grain size is fine and uniform, minimizing variations in strength and plasticity across different parts. This allows for consistent deformation during stamping, reducing part scrap.
Excellent Surface Quality: The cold rolling process (rolling + annealing + flattening) results in a smooth, low-roughness steel surface (typically Ra 0.4-1.6μm), meeting surface requirements without the need for additional polishing and making it suitable for subsequent surface treatments such as painting and electroplating
Excellent Weldability: Its low carbon content reduces cracking during welding, resulting in weld strength approaching that of the parent material, making it suitable for weldable stampings (e.g., splicing appliance housings). Applications
Due to its "high formability and good surface finish," DC06 is primarily used for products with complex shapes and high stamping precision requirements. Typical applications include:
Home Appliance Industry: Washing machine drums, refrigerator evaporators/condensers (requiring deep drawing), and air conditioning panels (requiring a smooth surface);
Automotive Industry: Automotive interior parts (such as instrument panel brackets) and lightly stressed exterior panels (such as door inner panels, non-load-bearing areas);
Daily Goods Industry: Stainless steel thermos liner (mild steel base + electroplated stainless steel layer), kitchen sinks (deep drawing);
Electronics Industry: Laptop casings (thin gauge DC06, such as 0.5-1.0mm, balances lightness and formability).
Selection Recommendation: If the design drawing indicates "DC06," ST16 (equivalent performance) is preferred for domestic procurement. For cost-sensitive and less difficult stamping, DC05/ST15 can be downgraded. VI. Usage Precautions
Process Compatibility: DC06 has good ductility but low strength. During stamping, the die gap must be controlled to avoid deformation caused by overpressure. It is also suitable for cold stamping (not for hot stamping, as high temperatures will damage the grain structure).
Storage Environment: Mild steel is prone to rust and should be stored in a dry, well-ventilated environment, away from water and corrosive gases. For long-term storage, cover with anti-rust paper or apply anti-rust oil.
Thickness Selection: Select thickness based on the stamping depth. For deep-drawn parts, a gauge of 0.5-2.0mm is recommended (excessive thickness will reduce formability, while too thin will cause cracking).
In summary, DC06 is a benchmark grade for deep-drawn cold-rolled steel. Its core value lies in solving the problem of difficult stamping complex shapes. It is a key material for lightweight parts in high-end home appliances and automobiles.

