Q235 Hot Rolled Plate Q355 Medium Plate/Carbon Steel Plate Automotive High Strength Steel Flat Plate Manganese Plate Ship Plate

Jan 26, 2026 Leave a message

Q: What are the key inspection items for purchasing Q235 plate?

A: Including material certificate inspection (yield strength, tensile strength, elongation), appearance inspection (no cracks, delamination, severe scratches), thickness tolerance inspection, flatness inspection, and flaw detection inspection for plates thicker than 50mm.

Q: What is the execution standard of Q235 plate for general structural use?

A: The national standard is GB/T 700-2006 (Carbon structural steel), and the special standard for plates is GB/T 3274-2023 (Hot-rolled steel plates and strips for structural use).

Q: Can Q235 plate be used in low-temperature environments? What is the temperature limit?

A: Q235A is prohibited for low-temperature use; Q235B is suitable for ≥20℃; Q235C for ≥0℃; Q235D for ≥-20℃. It is not applicable for temperatures below -20℃, and low-temperature steel such as Q355D/E is recommended.

Q: What are the surface treatment requirements for Q235 plate used outdoors?

A: Anti-corrosion treatments such as shot blasting and derusting (up to Sa2.5 level) are required, followed by spraying anti-rust paint + topcoat (total film thickness ≥150μm). Hot-dip galvanizing (zinc layer thickness ≥85μm) is adopted for severely humid environments, with regular maintenance.

Q: Can Q235 plate be welded with other steels? What are the precautions?

A: It can be welded with low-carbon/low-alloy steels such as Q355 and 20# steel. Select matching welding electrodes according to the material with lower strength (e.g., E43 series for Q235 and Q355 welding). Welding with high-alloy steel or high-carbon steel is not recommended to avoid welding joint cracking.