Q235/S235jr/S355jr/S235/A36/Dx51d/Dx52D/Dx53D/SGCC Strong Gi Galvanized Plate for Automotive

Oct 21, 2025 Leave a message

DC53D-XM-M-137.5-137.5-FB-C5.pdf

What is DX53D sheet?
DX53D is a hot-dip galvanized steel sheet that complies with DIN EN 10346, with material number 1.0951. It is a mild steel and a deep-drawing grade.
What does "DX" in DX53D stand for?
"DX" is the prefix used in German standards for hot-dip galvanized steel sheet for cold forming.
What is the difference between DX53D and DC53D?
DC53D must be based on a cold-rolled sheet substrate, resulting in a clean, bright surface and suitable for applications requiring high surface quality and formability. DX53D can be based on either hot-rolled or cold-rolled sheet and is suitable for general-purpose forming.
What is the chemical composition of DX53D sheet?
The chemical composition (maximum mass fraction) is: C ≤ 0.12%, Si ≤ 0.50%, Mn ≤ 0.60%, P ≤ 0.10%, S ≤ 0.045%, and Ti ≤ 0.30%. Performance Characteristics
What are the mechanical properties of DX53D sheet?
Yield strength is 140-260 MPa, tensile strength is 270-380 MPa, and elongation after fracture (A80) is ≥30%.