Q: Can Q355 steel plate be used for low-temperature environments?
A: Yes, but it is necessary to select the appropriate grade. Q355D is suitable for -20℃ low-temperature environment, and Q355E is suitable for -40℃ ultra-low temperature environment. Q355A/B/C grades are not recommended for low-temperature environments, because their low-temperature toughness is insufficient and they are easy to brittle fracture.
Q: Can Q355 steel plate be used for pressure vessels?
A: Yes. Q355 steel plate can be used for the manufacture of low and medium pressure vessels (design pressure ≤1.6MPa) after passing the relevant performance tests. It is necessary to select the appropriate grade (preferably Q355C/D) and ensure that the chemical composition and mechanical properties meet the requirements of GB 150-2011 "Pressure Vessels" standard.
Q: What national standards are applicable to Q355 steel plate?
A: The main applicable standards are:
GB/T 1591-2018: Low-alloy high-strength structural steels;
GB/T 709-2019: Hot-rolled steel plates and sheets - Dimensions, shape, weight and tolerances;
GB/T 3274-2017: Carbon structural steel and low-alloy structural steel hot-rolled plates and strips.**
Q: What are the common quality inspection items of Q355 steel plate?
A: Common inspection items include: chemical composition analysis (spectrometry), mechanical property test (tensile test, impact test, bending test), dimensional tolerance inspection (thickness, width, length, flatness), surface quality inspection (no cracks, folds, scars, delamination, etc.), and non-destructive testing (ultrasonic testing, magnetic particle testing, etc., according to customer requirements).
Q: What is the ultrasonic testing standard for Q355 steel plate?
A: The ultrasonic testing of Q355 steel plate is generally in accordance with GB/T 6402-2018 "Steel Forgings - Ultrasonic Inspection" or GB/T 2970-2016 "Steel Plates for Pressure Vessels - Ultrasonic Inspection". The testing grade can be selected according to customer requirements (e.g., Grade I, Grade II, Grade III), and the unqualified parts can be repaired or rejected.

