Q355 Weather Resistant Steel Plate/Weather Resistant Structural Steel Plate

Feb 27, 2026 Leave a message

What are the key points for the appearance quality acceptance of Q355 steel plates?

No cracks, scabs, folds, slag inclusions, or delamination; surface corrosion grade ≤ A; dimensional deviations conform to GB/T 709 standard; uniform thickness, no obvious deformation.

What are the design strength values ​​for Q355 steel plates in architectural design?

Thickness ≤ 16mm: Compressive/Tensile/Bending design value 305MPa, Shear 175MPa.

16-40mm: Compressive/Tensile/Bending 295MPa, Shear 170MPa.

40-63mm: Compressive/Tensile/Bending 290MPa, Shear 165MPa.

13. What are the selection requirements for Q355 steel plates in seismic design?

In seismic zones of intensity 8 and above, external frame columns and supporting components must use Q355D/E grade (-20℃ impact toughness). Key load-bearing components of super high-rise buildings must meet seismic performance-based design requirements, with Z35 grade Z-direction steel used in the core area of ​​joints.

14. Considerations for using Q355 plates in steel structure joint design?

Thick plate joints (≥40mm) must use Z-direction steel to avoid lamellar tearing.

Control weld quality; full penetration welds require 100% UT testing, achieving Grade II compliance.

Stiffening ribs should be appropriately placed to avoid stress concentration; stiffening ribs are required in the web of energy-dissipating beam segments.

15. Key points for the application of Q355 plates in composite concrete structures?

In steel-concrete composite beams and columns, Q355 plates provide bending and shear resistance, while concrete provides compressive strength and stiffness.

Stud placement should comply with specifications to ensure coordinated work between steel and concrete; the load-bearing capacity of composite components can be increased by 30%-50%.