Treating for Acidity
If acidity is the problem, installing a neutralizing filter usually works best. These filters contain chips of calcium carbonate, marble, magnesia, or other alkaline materials that dissolve as the water neutralizes. Acid-neutralizing filters are usually installed after the pressure tank, and as water flows through, pH increases and corrosivity decreases. This process makes the water harder and may decrease water pressure. The neutralizing material must be replenished as it dissolves, and the filters usually must be backwashed to remove trapped particles.
Chemical Neutralization
Another way to neutralize acidic water is to add a solution of sodium hydroxide or sodium carbonate by installing a chemical feed pump before the pressure tank. For low-sodium diets, potassium hydroxide can be used instead. This system is simple and inexpensive, does not increase hardness or reduce pressure, and the injection rate should be adjusted to produce a pH of 7.5 to 8.0. Injection units require significant maintenance including filling solution tanks and maintaining the feed pump. Soda ash is preferable to sodium hydroxide, which is extremely caustic and requires special safety precautions.
Reducing Salts
Removing high concentrations of dissolved salts requires a reverse osmosis system, which may require water pretreatment and large storage tanks, and increases overall water use by 30 to 200 percent while generating wastewater with concentrated salts. Reverse osmosis can remove 80 to 95 percent of salts; treated water may be so low in salts that it corrodes plumbing, so it should be transferred through non-metallic pipe. For whole-house systems, food-grade polyphosphate or silicate compounds can be added to deposit a thin protective film inside the pipe; the film slowly dissolves so the material must be maintained at proper feed levels.
Reducing Dissolved Oxygen
Installing a flexible membrane or floating disc in the pressure tank minimizes the water's contact with air, reducing oxygen-driven corrosion and waterlogging. Long-term protection may require injecting polyphosphate or silicate compounds. A large semi-open storage tank allows air to escape, but requires a tank twice the daily-use rate and chlorination since the water is no longer pressurized.
Systematic Protection Strategy
Corrosion control combines water chemistry adjustment with system design: neutralize acidity to raise pH, control salt concentration, minimize oxygen contact, and maintain protective films. Regular water testing identifies the dominant corrosion driver, and the treatment method should be selected accordingly rather than applying a single approach.
Frequently Asked Questions
Q: What causes galvanized pipe corrosion?
Low pH acidity, high dissolved salts, high dissolved oxygen, and aggressive ions attack the zinc coating and then the steel pipe wall.
Q: How is acidic water treated?
With a neutralizing filter containing calcium carbonate or magnesia, or by chemical injection of soda ash or sodium hydroxide to raise pH to 7.5 to 8.0.
Q: What is the role of polyphosphate?
It deposits a thin protective film inside the pipe that limits water contact; the film must be maintained with continuous feeding.
Q: How does dissolved oxygen affect corrosion?
Oxygen drives the cathodic reaction of corrosion; minimizing air contact with a membrane tank or floating disc reduces the corrosion rate.
Q: Is reverse osmosis practical for whole-house systems?
Generally not, due to large storage and water waste; film-forming treatments are more practical for domestic systems.
Q: Can water treatment completely eliminate corrosion?
It reduces corrosion to acceptable levels but generally does not eliminate it, so monitoring and maintenance continue.

