In home appliance manufacturing, the purpose of galvanizing SGCC steel is to prevent corrosion. The zinc layer protects the substrate through sacrificial anodes, extending the service life of components such as washing machine inner drum and refrigerator back in humid environments; improving processability, optimizing stamping and welding performance; meeting appearance requirements, small zinc flower/no zinc flower surface is suitable for spraying or direct exposure; cost advantage, replacing stainless steel at a lower cost, suitable for components such as microwave oven shells.
Galvanizing makes home appliance products both durable, productive and cost-effective.

The SGCC steel galvanizing (GI) process can be divided into three stages: pre-treatment, galvanizing, and post-treatment.
1. Pretreatment (removal of surface contaminants)
Degreasing: alkaline solution (60-80℃) to remove grease and dust
Pickling: hydrochloric acid (15-20%) to dissolve iron oxide (reaction time 1-3 minutes)
Water washing: deionized water to rinse residual acid
Plating aid: immerse in ZnCl₂·NH₄Cl solution (80-120g/L) to form a protective film to prevent oxidation
2. Hot-dip galvanizing (core link)
Zinc liquid composition: 99.995% pure zinc or Zn-0.2%Al alloy
Zinc immersion temperature: 445-465℃ (to avoid excessive reaction of iron and zinc)
Zinc immersion time: 3-10 seconds (adjusted according to the thickness of the steel strip)
Air knife thickness control: high-pressure air (0.2-0.5MPa) purging, precise control of zinc layer (40-180g/m²)
3. Post-treatment (to improve performance)
Cooling: natural cooling (large zinc flower) or forced cooling (small zinc flower)
Passivation: chromate/chrome-free passivation (such as silane) to prevent white rust
Oil coating: fingerprint-resistant oil or anti-rust oil protection
Finishing: rolling to obtain a zinc-free mirror surface (Ra≤0.6μm)

As a leading steel company, our company has the following hot-dip galvanizing process:
Precise coating control: The intelligent air knife system and AI dynamic adjustment technology are used to achieve a coating thickness control accuracy of ±3g/m², far exceeding the industry standard of ±10g/m², ensuring stable and reliable product surface quality.
Innovative alloy formula: The exclusive Zn-Al-Mg multi-alloy coating technology improves the corrosion resistance of the product by 300%, and the salt spray test exceeds 2000 hours, which is particularly suitable for harsh environment applications.
Green production process: Chromium-free passivation technology and wastewater zero discharge system realize environmentally friendly production throughout the process and meet international environmental standards such as EU REACH.
Intelligent production: Equipped with a full-process digital control system, it can reduce production energy consumption by 30%, control the product defect rate below 0.5%, and greatly improve production efficiency.
Through continuous innovation, we provide customers in various industries with more durable, more environmentally friendly and more precise galvanizing product solutions.




