What are the requirements for the cutting and slitting processes of DC06?
Answer: ① Cutting tools must be sharp to avoid edge burrs (burrs can cause stress concentration and cracking during deep drawing); ② Tension should be uniform during slitting to prevent wavy edges; ③ The cutting direction should preferably be along the rolling direction (0° or 90°) to reduce the influence of anisotropy.
What are the main application areas of DC06?
Answer: Core applications: ① Automotive industry (external coverings and structural parts such as fuel tanks, oil pans, door panels, trunk lids, and roof covers); ② Home appliance industry (refrigerator liners, washing machine inner drums, and air conditioner housings); ③ Machinery manufacturing (complex stamped parts and containers); ④ Construction industry (simple supports, hangers, and structural parts with low strength requirements).
Why does the automotive industry prioritize DC06?
A: ① Deep drawing performance meets the requirements for complex curved surface forming (such as the curvature stretching of car door panels); ② High surface quality (O5 grade, no defects, good appearance after painting); ③ Excellent welding performance (suitable for automotive body welding processes); ④ Lightweight (low strength and high plasticity allow for thinner sheet metal), conforming to the trend of lightweighting.
Which scenarios are unsuitable for DC06? A: ① High-load structural parts (low yield strength, insufficient load-bearing capacity); ② High-temperature environments (long-term temperatures >300℃ will lead to decreased strength and poor plasticity); ③ Parts with high wear resistance requirements (low hardness, ≤57HRB); ④ Corrosive environments (requires prior anti-corrosion treatment, no natural corrosion resistance).
What is the difference between DC06 and SGCC (hot-dip galvanized cold-rolled substrate)? A: DC06 is a bare sheet (cold-rolled state), and its core advantage is deep drawing capability; SGCC is a hot-dip galvanized sheet with DC06 and other cold-rolled sheets as the base material, and its core advantage is corrosion resistance. If deep drawing and corrosion protection are required, SGCC products with DC06 base material can be selected.

