St12 cold rolled sheet VS St16 cold rolled sheet

Jul 24, 2024 Leave a message

ST12 cold-rolled sheet is ordinary cold-rolled steel, usually used in scenarios with low requirements for mechanical properties, such as general bending and forming. It is suitable for making some parts that do not require deep drawing or complex processing.
ST16 cold-rolled sheet is an ultra-low carbon ultra-deep drawing grade steel with greater ductility than the ultra-deep drawing grade. It is suitable for making ultra-deep drawing forming and more complex processing parts, such as fuel tanks, oil pans, fenders, wheel cover inner panels, etc.
Chemical composition:
In the chemical composition of ST12 cold-rolled sheet, the carbon (C) content is ≤0.10%, the manganese (Mn) content is ≤0.50%, and the phosphorus (P) and sulfur (S) contents are also relatively low.
In the chemical composition of ST16 cold-rolled sheet, the carbon (C) content is ≤0.006%, the manganese (Mn) content is ≤0.30%, the phosphorus (P) and sulfur (S) contents are also low, and the aluminum (Alt) content is ≥0.015%.
Mechanical properties:
The yield strength of ST12 cold-rolled sheet is usually ≤280MPa, the tensile strength is ≤270~410MPa, and the elongation after fracture is ≥28%.
The tensile strength of ST16 cold-rolled sheet is higher, the yield strength is between 110~170MPa, and the elongation after fracture is ≤43%.
Surface quality:
Both ST12 and ST16 cold-rolled sheets can have different surface quality grades, including the higher-grade finishing surface FB, the higher-grade finishing surface FC, and the super-grade finishing surface FD14.
Application areas:
Due to its ordinary mechanical properties, ST12 cold-rolled sheet is usually used in scenes with low requirements on material properties, such as some basic bending and forming processes.
ST16 cold-rolled sheet is suitable for fields with high requirements on material properties, such as automobile manufacturing and precision instruments, due to its excellent deep drawing performance and ductility.

St12 cold rolled sheet VS St16 cold rolled sheet