Is the passivation layer of galvanized coil resistant to ultraviolet light?

Nov 14, 2025 Leave a message

1.What are the main functions and types of passivation layers?

Main function: To improve the corrosion resistance of the zinc plating layer and delay the formation of white rust.

Common types:

Chromium-free passivation: Currently the mainstream environmentally friendly process, such as trivalent chromium passivation, chromium-free blue passivation, and chromium-free colored passivation. This type of passivation layer is usually an organic or inorganic composite film.

Chromium-containing passivation: A traditional process that uses hexavalent chromium to form a chromate-containing conversion film, offering excellent corrosion resistance, but it has been gradually phased out due to environmental concerns.

galvanized coil

2.What effect does ultraviolet light have on chromium-free passivation layers?

The impact is significant. Ultraviolet (UV) radiation is a major factor in the aging of polymer materials. If the passivation layer contains organic resins or components, prolonged exposure to UV radiation will cause these organic substances to undergo photo-oxidation, resulting in film powdering, discoloration, loss of luster, and microcracks.

Once the passivation film is damaged, the underlying zinc layer is directly exposed to the air, which will cause white rust to form more quickly, rendering it ineffective.

galvanized coil

3.What effect does ultraviolet light have on chromium passivation layers?

It has slightly better relative resistance. Hexavalent chromium conversion coatings are mainly inorganic, and their stability to ultraviolet light is higher than that of organic materials. However, their corrosion resistance will slowly decrease over time.

galvanized coil

4.What effect does ultraviolet light have on the zinc plating itself?

Zinc itself is not sensitive to ultraviolet light. The key issue lies in the "outer coat" that protects zinc-the passivation film.

 

5.What special considerations are needed when using galvanized coils outdoors in environments where they will be exposed to sunlight for extended periods (such as roofs and exterior wall panels)?

Short-term vs. Long-term:

Short-term storage/transport: Ordinary passivated galvanized coils are perfectly adequate; the effects of UV radiation are not significant in the short term.

Long-term outdoor use: Relying solely on the passivation layer will significantly reduce its protective lifespan.

Standard practice: Coating (Pre-painted steel sheet)

In the outdoor construction field, the standard practice is to use pre-painted steel sheets/coils.

Pre-painted steel sheets are made by coating one or more layers of organic coatings (such as polyester, silicone-modified polyester, PVDF, etc.) onto a galvanized substrate (after passivation).

This topcoat is specifically designed to resist various harsh environments, including:

UV radiation: UV absorbers and stabilizers are added to the coating to effectively prevent resin aging.

Rain, acid rain

Temperature changes

In this case, the passivation layer, as the bottom layer, mainly serves to enhance the adhesion between the substrate and the coating and provide "sacrificial anode" protection, while the task of UV resistance is entirely undertaken by the outermost pre-painted coating layer.