galvanized steel
DX54D is a hot-dip coated deep-drawing steel in the DX series, valued for high formability. Made of low-carbon steel, it's ideal for cold forming. "DX" denotes the series, "54" the formability grade, and "D" the deep-drawing quality. Both DX54D and DX53D are automotive steels, but DX54D has higher formability, making it better for complex shapes. DX54D (equivalent to FeP06G, steel number 1.0952) is used in automotive panels and appliance housings, with corrosion resistance for outdoor or moist conditions.
Exploring the Chemical Composition of DX54D
DX54D is an elite category of galvanized steel that owes its distinctive characteristics to the special chemical composition of the steel. As per the specified standard, its constituents comprise the following elements within the given limits:
- C (Carbon): maximum of 0.12%
- Mn (Manganese): maximum of 0.60%
- P (Phosphorus): maximum of 0.10%
- S (Sulfur): maximum of 0.045%
- Al (Aluminium): minimum 0.015% (this is added for deoxidation and as an aid in formability)
- Si (Silicon): maximum of 0.50%
Such chemical equilibrium can preserve the steel's excellent drawability, making it applicable in deep drawing operations with increased durability and relatively wear or corrosion resistance due to the zinc coating. Furthermore, incorporating these elements in small quantities aims to enhance the weldability of the DX54D and paint for its excellent application in different purposes.
In addition to the basic elements, galvanization is the preferred rust prevention technique because a layer of zinc coats the steel. Zinc content is given within specified limitations in essential industries, such as EN 10346, which makes it ready for indoor and outdoor operations. These aspects of the chemical composition greatly assert the worth of the DX54D sheet plate in high-end industries.
Mechanical Properties of DX54D Steel
| Property | Metric | Imperial |
| Tensile Strength | 270 – 370 MPa | 39 – 54 ksi |
| Yield Strength | 120 – 220 MPa | 17 – 32 ksi |
| Brinell Hardness | 90 – 120 HB | 90 – 120 HB |
| Rockwell Hardness | 50 – 65 HRB | 50 – 65 HRB |
| Vickers Hardness | 100 – 130 HV | 100 – 130 HV |
| Elongation | ≥ 36% | ≥ 36% |
| Elastic Modulus | 210 GPa | 30,500 ksi |
| Anisotropy (R-Value, Min) | ≥ 1.6 | ≥ 1.6 |
| Strain Hardening Index (n-Value, Min) | ≥ 0.18 | ≥ 0.18 |
Moderate Tensile and Yield Strength: Provides enough strength for durability without sacrificing formability, suitable for automotive and appliance parts.
High Elongation: Allows significant stretching, enabling complex shapes without cracking.
Good Anisotropy (R-Value): Ensures consistent properties in different directions, reducing defects in deep-drawn parts.
Stable Strain Hardening Index (n-Value): Supports gradual deformation, which helps maintain structural integrity during shaping.
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |