What a Galvanized Square Tube Is
A galvanized square tube is a welded structural hollow section with equal sides and a continuous zinc coating. The coating is applied in one of two ways. Continuously coated strip is formed and welded into tube on a production line, following the coating classes of EN 10346 from Z100 to Z600 g/m² of total zinc on both surfaces. Alternatively the finished tube is hot-dip galvanized in a batch process to EN ISO 1461, which suits sections that are cut, drilled and welded before protection is applied.
Because the closed square section carries bending loads equally in both directions and has a high torsional stiffness for its weight, it replaces angle and channel sections in many frames and is easier to assemble. Typical supply ranges run from 20 x 20 mm up to 200 x 200 mm with wall thickness from 1.5 mm to 10 mm, produced to EN 10219 with grades such as S235JRH and S355J2H, or to ASTM A500 Grade B and Grade C for other markets.
Construction and Engineering Structures
Construction is the largest single application area, covering both load-bearing frames and secondary components. The zinc coating is what makes the material practical for sites where steel is exposed to rain and humidity for years.
Structural support: columns, beams and bracing in lightweight factory buildings, warehouses, temporary structures and steel-framed houses.
Curtain wall and architectural metalwork: keels that carry glass or stone panels, mullion frames and decorative structural frames on high-rise buildings.
Railings and fencing: balcony guardrails, stair handrails, site fencing and park or school boundary fences, where the bright matte grey finish is acceptable as a final surface.
Scaffolding and formwork support: access scaffolds and support frames for concrete formwork, which are handled repeatedly and need abrasion-resistant protection.
Municipal works: light pole brackets, traffic sign frames, supports for utility tunnels and small diameter rainwater or drainage lines.
In these duties the tube is usually specified with a coating of Z275 or heavier, or with a batch galvanized coating of at least 70 µm, so that the structure reaches the design life of the building without repainting.
Machinery, Industrial Equipment and Power Infrastructure
Industrial users value the square tube for its flat faces, which simplify bolting, welding and the mounting of panels and components. In workshops the atmosphere carries oil mist, coolant and moisture, and the zinc coating prevents the surface rust that would otherwise damage appearance and equipment reliability.
Equipment frames and housings: machine tool bases, automation line frames, industrial cabinets and enclosures for treatment equipment.
Support structures: pipe supports, conveyor belt frames, robot arm rails and maintenance platforms on production lines.
Power facilities: support structures for transmission and distribution lines, plus substation fences, cable trays and brackets that must resist weathering for decades.
Communication equipment: antenna brackets for base stations, signal tower frames and protective frames for outdoor cabinets.
For outdoor power and telecom structures the zinc coating is normally combined with a heavier section wall thickness, because stiffness under wind load and resistance to atmospheric corrosion are the two governing requirements.
Transportation and Traffic Facilities
Transport applications combine vibration, impact and road or marine corrosion, so the coating has to tolerate mechanical damage as well as weathering. The sacrificial action of zinc is particularly useful here, because chips and stone impacts do not create corrosion pits.
Road and traffic facilities: highway guardrails, urban road separation barriers and bridge anti-collision railings.
Rail transit: safety railings and platform screen door frames for subway and high speed rail stations, as well as luggage racks and handrails inside vehicles.
Vehicles and trailers: chassis auxiliary frames, trailer cargo box frames and equipment mounting brackets on special purpose trucks.
Square tube frames are also widely used for temporary loading platforms and workshop trolleys, where reusability makes galvanized sections more economical than painted alternatives.
Agriculture, Livestock and Water Conservancy
Agricultural buildings are humid, often contain ammonia or pesticide residues, and are difficult to repaint, which makes a galvanized frame the practical choice for a long service period.
Greenhouse and breeding facilities: main frames of greenhouses, fencing for livestock and poultry farms, and frames for feed processing equipment.
Irrigation and water projects: support structures for farmland irrigation pipes, pumping equipment brackets and other small water conservancy facilities.
Storage and logistics buildings: light racking, sorting platform frames and shelter structures on farms and in rural warehouses.
Where the frame is in direct contact with soil, manure or fertiliser, the coating class should be increased and the detail should allow water to drain away from the connection points.
Specification and Selection Guide
| Parameter | Typical options | Selection note |
|---|---|---|
| Outside size | 20 x 20 mm to 200 x 200 mm | Match to span and load, check deflection first |
| Wall thickness | 1.5 mm to 10 mm | Thicker walls for load-bearing and outdoor frames |
| Steel grade | S235JRH, S355J2H, ASTM A500 Grade B or C | Higher grade where strength governs |
| Product standard | EN 10219, ASTM A500 | State the standard on the enquiry |
| Coating, coated strip | Z100 to Z600, EN 10346 | Z275 or heavier for uncovered outdoor use |
| Coating, batch dipped | EN ISO 1461, from 70 µm average | Use for welded assemblies and heavy sections |
The most common specification error is to design the section for strength while under-specifying the coating for the exposure class. For external structures, fixing the coating class and the inspection interval at design stage is what protects the service life of the finished frame.
Frequently Asked Questions
Q: What is the difference between pre-galvanized and hot-dip galvanized square tube?
Pre-galvanized tube is produced from continuously zinc coated strip, so the weld seam and cut ends are only partially protected. Hot-dip galvanizing covers the finished tube inside and out, including cut ends and weld areas, and is therefore preferred for outdoor load-bearing structures.
Q: Which coating class is suitable for outdoor construction frames?
For continuously coated tube, Z275 is a common minimum for sheltered outdoor use, with Z350 or Z450 for coastal or heavily polluted sites. Batch galvanized assemblies should meet the EN ISO 1461 minimum for the relevant steel thickness.
Q: Can galvanized square tubes be welded without damaging the coating?
Welding always destroys the zinc locally. Extract the fume, then repair the welded zone with a zinc-rich coating. If the whole frame is to be hot-dip galvanized afterwards, all fabrication should be completed first so that every surface is coated in one pass.
Q: Are square tubes stronger than round tubes of the same size?
Not in pure torsion, where a round section performs better. Square tubes carry bending moments equally in both directions, which is the reason they are preferred for frames, railings and equipment supports that are loaded on two axes.
Q: How long does a galvanized square tube frame last outdoors?
Service life follows the coating thickness divided by the local zinc corrosion rate. A coating in the range of 20 µm per side in a moderate climate is normally expected to give several decades of protection before first maintenance, with a shorter interval in aggressive coastal or industrial atmospheres.
Q: What should be checked on delivery of galvanized square tubes?
Verify the section size and wall thickness against the order, confirm the steel grade from the mill certificate, and inspect the coating for skips, bare patches, excessive dross or damage. Coating mass or thickness should be measured against the declared class or standard.

