What are the flatness requirements for color-coated steel rolls?

Dec 01, 2025 Leave a message

1.What are the definitions and common types of flatness?

Wavy Shapes:

Edge Wavy: Wavy edges on the strip.

Center Wavy: Wavy middle sections of the strip.

Second Rib Wavy: Wavy patterns appearing at a certain distance from the edge (e.g., at 1/4 of the distance).

Bowl-Shaped Deformation: Uneven, bowl-shaped deformations resembling small gourds or cups on the surface of the strip.

Bending: Transverse bending along the length of the strip.,

Color-coated rolls

2.What are the quantitative indicators for measuring flatness?

Unit:

This is an internationally recognized physical quantity for measuring the flatness of strip steel, representing the relative length difference.

The smaller the I unit value, the better the flatness. High-grade appliance panels or exterior panels usually require an I unit value of 5-10 or lower, while general building panels can have a value of 20-40.

Wave Height and Wavelength:

This is a more intuitive measurement method, measuring the vertical distance between the highest and lowest points of a wave (wave height) and the horizontal distance between two adjacent wave crests (wavelength).

It is usually evaluated using the ratio of wave height to wavelength. The smaller the ratio, the better the smoothness.

Many company standards or user agreements directly specify that the wave height must not exceed a certain number of millimeters on a sample of any given length (e.g., 1 meter or 2 meters).

Color-coated rolls

3.What are the requirements for the flatness of color-coated steel rolls in the construction industry?

High standards are required. Poorly flat panels will result in "oil-strip-like" bulges or depressions after installation, severely affecting the aesthetics and sealing of the building facade. The flatness requirements are particularly stringent for long panels (such as those exceeding 50 meters).

Color-coated rolls

4.What are the requirements for the flatness of color-coated steel coils in the home appliance industry?

The requirements are extremely high. Even the slightest waviness will be very noticeable after spraying or under certain lighting conditions, affecting the product's premium feel. This is one of the areas with the most stringent requirements for flatness.

 

5.What are the key factors affecting flatness?

Substrate Flatness: The original shape of the cold-rolled substrate is fundamental. If the substrate itself has waviness, subsequent coatings are difficult to correct.

Color Coating Production Line Process:

Tension Control: Tension settings on the production line are crucial; uneven tension directly leads to new waviness.

Roasting Temperature Uniformity: During baking and curing, uneven roasting temperatures cause inconsistent thermal expansion and contraction in different parts of the strip, resulting in thermal warping.

Coating Uniformity: Significant differences in coating thickness between the front and back sides can cause curling or warping due to uneven stress.

Cooling Process: Uneven cooling also generates internal stress, affecting the strip shape.

Winding and Tension: Improper winding tension can cause defects such as "towering" or "flattened coils," manifesting as localized unevenness after unwinding.