S280GD galvanized steel
S280GD galvanized steel is available in three primary forms at GNEE STEEL: coils, sheets, and strips. Each product form is designed to meet specific industry needs, offering various sizes and thicknesses suitable for a wide range of applications.
S280GD impresses with a balanced combination of high strength and good formability. The minimum yield strength Rp0.2 of 280 N/mm² and a characteristic tensile strength of at least 360 N/mm² ensure reliable load-bearing capacity even under dynamic load conditions. At the same time, the hot-dip galvanized surface enables an extended service life in corrosive environments.
S280GD Galvanized Steel Coil Chemical Composition
| Element | Content (weight%) |
| Carbon (C) | ≤ 0.20 |
| Manganese (Mn) | ≤ 1.70 |
| Phosphorus (P) | ≤ 0.10 |
| Sulfur (S) | ≤ 0.045 |
| Silicon (Si) | ≤ 0.60 |
S280GD Galvanized Steel Coil Mecahmical Properties
| Property | Value | |
| Tensile Strength (Rm) | 360 MPa | |
| 0.2% Proof Strength (Rp0.2) | 280 MPa | |
| Min. Elongation (A, Lo = 80 mm) | – | 18% |
| 0.5mm < t ≤ 0.7mm | 16% | |
| 0.35mm < t ≤ 0.5mm | 14% | |
| t ≤ 0.35mm | 11% | |
| Bending Center Diameter (mm) | 1a | |
| S280GD tensile strength can range up to 140 MPa, depending on the specific material grade and processing conditions. | ||
S280GD Galvanized Steel Products Specifications
| Product | Thickness Range | Width Range | Length Range |
| S280GD Steel Coil | 0.30 mm to 3.00 mm (0.012″ to 0.118″) | 600 mm to 1500 mm (23.62″ to 59.06″) | Custom lengths available |
| S280GD Steel Sheet | 0.30 mm to 3.00 mm (0.012″ to 0.118″) | 600 mm to 1500 mm (23.62″ to 59.06″) | |
| S280GD Steel Strip | 0.30 mm to 2.50 mm (0.012″ to 0.098″) | 30 mm to 500 mm (1.18″ to 19.69″) |
Properties
S280GD impresses with a balanced combination of high strength and good formability. The minimum yield strength Rp0.2 of 280 N/mm² and a characteristic tensile strength of at least 360 N/mm² ensure reliable load-bearing capacity even under dynamic load conditions. At the same time, the hot-dip galvanized surface enables an extended service life in corrosive environments.
The different cover variants offer specific advantages:
+Z (pure galvanized):
Standard corrosion protection for general conditions.
+ZF (zinc-iron):
Improved coating adhesion and increased resistance to mechanical stress.
+ZA (zinc-aluminium):
Optimized resistance in atmospheric environments.
+ZM (zinc-magnesium):
Extended protection in maritime and saline zones through passivating behavior.
+AZ (aluminum-zinc):
Combination of heat resistance and corrosion protection, ideal for high surface temperatures.
+AS (aluminum-silicon):
Especially for applications with extreme temperature influences and high corrosion loads.
S280GD is also characterized by its good weldability, homogeneous microstructure and reliable dimensional stability, which ensures precise further processing in profiling, bending and welding processes.
Zinc Thickness
| Zinc Coating Grade | Zinc Coating (g/m²) | Corrosion Resistance | Typical Applications | Remarks |
| Z30 | 30 | Very low | Indoor parts, home appliance inner panels, ventilation ducts | Not suitable for outdoor use |
| Z60 | 60 |
Low |
Indoor structures, temporary facilities | Low cost |
| Z80 | 80 | Medium | Light steel structures, base metal for PPGI | Good cost performance |
| Z100 | 100 | Medium | PPGI, fencing, general construction
|
Common export grade |
| Z120 | 120 | Medium-High |
|
Longer service life |
| Z140 | 140 | Medium-High | Industrial buildings, agricultural facilities | Suitable for outdoor use |
| Z180 | 180 | High | Long-term outdoor structures, equipment housings
|
Recommended for outdoor use |
| Z200 | 200 | Very high | Humid environments, heavy structures
|
Higher cost |
| Z275 | 275 | Excellent
|
Coastal areas, solar mounting systems, high-corrosion environments | High standard |
Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |
FAQ:
What is the typical tensile strength?
Minimum tensile strength is around 360 MPa.
What is the minimum elongation?
Minimum elongation A80 is typically 18 % (varies slightly with thickness).
What thicknesses are available for S280GD sheet/coils?
Thickness can range from about 0.12 mm up to 6.0 mm or more upon request.
Can S280GD be supplied with customized widths and lengths?
Yes - widths (e.g., 600–2000 mm) and lengths/coils can be customized.
What types of galvanization processes are used?
It supports hot-dip galvanizing, electro-galvanizing, and pre-galvanizing.
How thick can the zinc coating be?
Zinc coating weights typically range from Z30 to Z600 g/m² double-sided.