S280GD Galvanized Steel
Structural steel plate hot dip galvanized S280GD+Z,S280GD,S280GD+ZF are rolled according to steel standard EN 10147.Sealed treatment for galvanized steel plate and coil S280GD+Z,S280GD,S280GD+ZF shall be chosed after rolled finished,application of a transparent organic film coating of mass about 1g/m2.This treatment for zinc coated steel sheet S280GD+Z,S280GD,S280GD+ZF offers additional corrosion protection,especially the protection against fingerprints.It may improve the sliding characteristics during forming operations and can be used as a priming coat for subsequent varnishing.
GNEE STEEL offers S280GD galvanized steel in various forms, including coils, sheets, and strips. Each product supports a range of metal coatings such as Z275, Z100, and AZ150, meeting rigorous quality standards.

S280GD Steel Coating Types and Functions
At GNEE STEEL, we offer a range of S280GD galvanized steel products with different coating types. The coating weight typically ranges from Z60 to Z275 g/m², and we can provide specific thicknesses based on your needs.
| Coating Type | Properties | Applications |
| S280GD+Z (Zinc Coating) | Provides basic corrosion protection. | General outdoor use, light industrial applications. |
| S280GD+ZF (Zinc-iron Alloy Coating) | Enhanced wear resistance and corrosion protection. | Automotive, industrial settings. |
| S280GD+ZA (Zinc-aluminum Alloy Coating) | Better high-temperature resistance and durability. | Roofing, machinery, high-heat environments. |
| S280GD+ZM (Zinc-magnesium Coating) | Superior corrosion resistance in aggressive environments. | Marine structures, coastal areas, chemicals. |
| S280GD+AZ (Zinc-aluminum-magnesium Coating) | Maximum protection in harsh environments. | Automotive, construction, extreme weather. |
| S280GD+AS (Zinc-silver Alloy Coating) | Improved aesthetics and corrosion resistance. | Consumer goods, appliances, decorative elements. |
In addition to our wide range of coatings, GNEE STEEL also offers various surface treatments including passivation, oil coating, chromate coating, and phosphate coating.
Zinc Thickness
| Zinc Coating Grade | Zinc Coating (g/m²) | Corrosion Resistance | Typical Applications | Remarks |
| Z30 | 30 | Very low | Indoor parts, home appliance inner panels, ventilation ducts | Not suitable for outdoor use |
| Z60 | 60 |
Low |
Indoor structures, temporary facilities | Low cost |
| Z80 | 80 | Medium | Light steel structures, base metal for PPGI | Good cost performance |
| Z100 | 100 | Medium | PPGI, fencing, general construction
|
Common export grade |
| Z120 | 120 | Medium-High |
|
Longer service life |
| Z140 | 140 | Medium-High | Industrial buildings, agricultural facilities | Suitable for outdoor use |
| Z180 | 180 | High | Long-term outdoor structures, equipment housings
|
Recommended for outdoor use |
| Z200 | 200 | Very high | Humid environments, heavy structures
|
Higher cost |
| Z275 | 275 | Excellent
|
Coastal areas, solar mounting systems, high-corrosion environments | High standard |
S280GD Galvanized Steel Coil Chemical Composition
| Element | Content (weight%) |
| Carbon (C) | ≤ 0.20 |
| Manganese (Mn) | ≤ 1.70 |
| Phosphorus (P) | ≤ 0.10 |
| Sulfur (S) | ≤ 0.045 |
| Silicon (Si) | ≤ 0.60 |
S280GD Galvanized Steel Coil Mecahmical Properties
| Property | Value | |
| Tensile Strength (Rm) | 360 MPa | |
| 0.2% Proof Strength (Rp0.2) | 280 MPa | |
| Min. Elongation (A, Lo = 80 mm) | – | 18% |
| 0.5mm < t ≤ 0.7mm | 16% | |
| 0.35mm < t ≤ 0.5mm | 14% | |
| t ≤ 0.35mm | 11% | |
| Bending Center Diameter (mm) | 1a | |
| S280GD tensile strength can range up to 140 MPa, depending on the specific material grade and processing conditions. | ||
S280GD Galvanized Steel price
The price of S280GD+Z galvanized steel coil depends on the material, specification, surface treatment and supplier, the minimum order price is 650-850USD per ton, the thicker the zinc layer, the higher the price. Meanwhile, the price for different surface effects such as zero zinc, small zinc, fingerprint resistance, chromate passivation, etc. is also different, if you need, you can leave a message to let us know, and we will give you a free quote.
Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |

