1.What are the specific applications of galvanized steel greenhouse core structures?
Main arch: The curved/triangular steel frame supporting the greenhouse roof must withstand snow and strong wind loads. Typically constructed from 30-50mm Φ hot-dip galvanized round or square tubes (zinc coating thickness ≥ 80μm) to prevent rusting in high humidity environments (humidity inside the greenhouse often reaches 70%-90%).
Columns and beams: Vertical columns supporting the ground (50-80mm Φ galvanized pipes) and horizontal beams connecting the arch (square/rectangular tubes) are in direct contact with the soil and moisture inside the greenhouse. The zinc coating protects the steel from corrosion caused by acidic/alkaline soil (such as saline-alkali soil).
Side/end wall frames: Ventilation framing and entrance/exit door frames on the greenhouse side must withstand outdoor rain. Galvanized steel reduces rust and deformation caused by rain.

2.What are the specific applications of galvanized steel in field crop support structures?
Grape/Kiwifruit Trellis: Use 20-30mm Φ galvanized round tubes to create a "post + cross-tie" system. The posts are buried in the soil (anti-corrosion caps can be added to the bottom to further prevent soil corrosion). Steel wire is tied to the cross-tie for vines to climb, preventing the wooden trellis from rotting and requiring replacement every 2-3 years.
Fruit Tree Anti-Lodging Support: For seedlings or tall fruit trees (such as pears and apples), a "triangular support" is constructed from 15-20mm Φ galvanized round steel. One end secures the trunk, while the other is driven into the ground to prevent the tree from falling due to strong winds. The zinc coating protects against soil moisture and rain erosion.

3.What are the specific applications of galvanized steel in the structure of supporting components of irrigation systems?
Irrigation Pipe Supports: PVC/PE irrigation pipes (diameter ≥ 110mm) laid outdoors should be secured to the ground or wall using galvanized angle steel (∠30-50mm) to prevent the pipes from sagging due to their own weight.
Drip/Sprinkler Equipment Protection Frames: Protective frames made of welded galvanized steel sheets are used to protect drip irrigation filters, sprinkler solenoid valves, and other equipment in the field from damage by agricultural machinery and animals, while also resisting rainwater corrosion.

4.What are the specific applications of galvanized steel in livestock and poultry breeding pen structures?
Load-bearing frames for pens: Roof beams (galvanized H-beams/channel steel) and wall columns (galvanized square tubes) in enclosed pig and chicken houses must support the weight of roof insulation and ventilation equipment while also resisting high humidity (60%-80% humidity due to livestock and poultry respiration) and ammonia corrosion.
Farming fences: "Positioning pens" and "nursery pens" in pig houses, and "cow bedding pens" in cattle farms, are constructed from 12-16mm galvanized round steel welded into a grid pattern (grid size is designed based on livestock and poultry size; for example, the grid for pig positioning pens is approximately 10 x 15cm). These replace rust-prone ordinary steel mesh and reduce corrosion caused by fecal residue. The smooth galvanized surface also makes them easy to rinse and clean.
Feeding equipment supports: Trough supports and waterer suspension brackets for automatic feeding lines are made of galvanized angle steel or square tubes. These brackets come into direct contact with feed residue and water dripping, and the galvanized coating prevents corrosion-induced fractures.
5.What are the specific applications of galvanized steel in aquaculture facilities?
Fish Pond Aerator Bracket: This bracket is used to secure the impeller-type aerator in the pond. It's made of 40-60mm Φ galvanized steel pipe and is partially immersed in water or exposed to humid air for extended periods. The galvanized coating reduces corrosion from the pond water (which contains algae and microorganisms).
Nursery Tank Frame: For cement or canvas tanks used in factory-scale aquaculture, the support frame is made of galvanized square pipe, or used to construct an operating platform alongside the tank to prevent steel corrosion caused by humid environments.

