What is the chemical composition of Q345 steel?

Aug 27, 2025 Leave a message

What is the chemical composition of Q345 steel?
The chemical composition of Q345 steel strictly adheres to the national standard GB/T 1591-2018, "Low-Alloy High-Strength Structural Steel." Its core characteristic is the addition of basic alloying elements such as manganese (Mn) and silicon (Si) to enhance strength. Some grades incorporate microalloying elements such as vanadium (V), titanium (Ti), and niobium (Nb) to refine the grain size (further improving toughness and strength). The content of harmful elements such as carbon (C), phosphorus (P), and sulfur (S) is strictly controlled to avoid reducing toughness or causing weld cracks.
The chemical composition is not fixed; instead, it is divided into ranges based on quality grade (A/B/C/D/E) and thickness specifications (with higher thicknesses requiring stricter upper limits for some elements). The following is the standard's core element content ranges (mass fraction, %), applicable to steel thicknesses ≤60mm (for thicknesses greater than 60mm, the upper limits for elements such as C and Mn are slightly lowered; please refer to the standard for details)

Key Notes
Meaning of "Optional Additive Elements": V, Ti, and Nb are not mandatory components of Q345. Steel mills may choose to add them based on production processes (such as continuous casting and rolling) and performance requirements. For example, V or Ti may be added to improve weldability or low-temperature toughness; a small amount of Nb may be added to balance weather resistance.
Thickness Impact: For steel thicknesses greater than 60mm, to avoid center segregation (uneven element distribution leading to performance fluctuations), the standard lowers the upper limits for C and Mn (e.g., C ≤ 0.18%, Mn ≤ 1.50%). Furthermore, stricter controls are placed on P and S. For details, please refer to the "Chemical Composition Adjustment Table for Steels of Different Thicknesses" in GB/T 1591-2018.
Differences from Q235: Q235 (ordinary carbon steel) contains virtually no V, Ti, or Nb, and has an even lower Mn content (0.30-0.65%), resulting in significantly lower strength than Q345. Q345, on the other hand, achieves a balance of high strength and good toughness through the synergistic effects of Mn and microalloying elements.

For a more precise chemical composition (e.g., Q345D plate from a specific steel mill), refer to the steel's quality certificate (material list), which will indicate the actual element content tested (must be within the standard range).