What is the corrosion resistance of cold-rolled steel?

Oct 09, 2025 Leave a message

1. What is the corrosion resistance of cold-rolled steel? Why is bare cold-rolled steel prone to rusting? Cold-rolled steel has poor corrosion resistance (much lower than galvanized steel and stainless steel):
Reason: Cold-rolled steel is based on carbon steel (containing iron) and lacks surface oxide scale protection (removed by pickling). When exposed to air/moisture, the iron reacts chemically with oxygen and hydrogen to form Fe₂O₃ (rust).
Rust rate: In humid environments (such as rainy days and high-humidity workshops), rust spots can appear within 1-2 days. In dry environments, the steel can be stored for 1-2 weeks (moisture-proof).
Therefore, bare cold-rolled steel should be processed as soon as possible or its corrosion resistance should be improved through painting, galvanizing, or other methods.
2. How is the hardness of cold-rolled steel tested? What is the hardness range for different materials? Common testing methods: Brinell hardness (HB) or Vickers hardness (HV) (Brinell hardness requires a small load due to the thinness of cold-rolled steel). Hardness ranges for different materials (after annealing):
Common grade (DC01/SPCC): HB 60-80, HV 70-90 (low hardness, easy to process);
Stamping grade (DC03/SPCD): HB 55-75, HV 65-85 (better ductility, slightly lower hardness);
Deep drawing grade (DC06/SPCE): HB 50-70, HV 60-80 (optimal ductility, lowest hardness);
Hard cold-rolled steel (unannealed): such as SPCC-SD (hard), HB 100-130, HV 110-140 (high strength, suitable for structural parts).
3. What are the "flatness" defects of cold-rolled steel? How are they detected? Plate shape defects (problems affecting flatness during processing):

Waviness: Edge wave (raised edges on both sides of the plate), center wave (raised center of the plate), and secondary wave (raised 1/4 of the way from the edge);

Bow: The plate is curved overall (like a pot lid) and cannot be laid flat;

Scythe camber: The edge is curved (visible after uncoiling);

Detection Methods:

Visual Inspection: Lay the plate flat on a platform and observe for bulges/depressions;

Instrumental Inspection: Use a "shape meter" (such as a laser shape meter) to measure stress at various points on the plate in real time and generate a shape curve (quantifying the degree of defects).

4. What is the "weldability" of cold-rolled plate? What welding methods are suitable? Cold-rolled steel (carbon steel) offers excellent weldability (low carbon content, such as SPCC, with a carbon content ≤0.15% and no tendency to harden), making it suitable for a variety of welding methods:
Arc welding (manual welding): Suitable for thick cold-rolled steel (≥1mm), such as for splicing structural parts, using J422 electrodes;
Resistance spot welding: Suitable for thin cold-rolled steel (0.3-1mm), such as automotive bodies and appliance chassis (high efficiency, aesthetically pleasing weld joints);
Gas shielded welding (CO₂ welding): Suitable for medium-thick steel (0.8-3mm), with minimal welding distortion and suitable for high-precision parts;
Note: Weld slag must be removed after welding, and the weld seam should be painted for rust prevention (cold-rolled steel welds are prone to rust).

5. Where is cold-rolled steel primarily used in the automotive industry? Why choose cold-rolled steel? The automotive industry is a core application area for cold-rolled steel (accounting for over 30% of total demand). Key applications include:

Body panels: doors, hoods, and trunk lids (using deep-drawing-grade cold-rolled steel, such as DC06/SPCE, for its excellent plasticity and ability to form complex curved surfaces in one go);

Body structural components: frames, crossmembers, and pillars (using high-strength cold-rolled steel, such as HC340LA, with a yield strength ≥340 MPa and high impact resistance);

Interior components: instrument panel brackets and seat frames (using standard-grade cold-rolled steel, such as DC01, for its low cost and ease of processing);

Reasons for selection: High dimensional accuracy (ensuring tight clearances in body assembly); smooth surface (facilitating painting); adjustable strength (adaptable to different component requirements); and excellent weldability (facilitating body assembly).

6. What is the home appliance industry using cold-rolled steel for? Why do some home appliances use galvanized cold-rolled steel instead of bare cold-rolled steel? Applications in the Home Appliance Industry:
Exteriors: Refrigerator side panels, washing machine housings, air conditioner outdoor unit housings (use standard-grade cold-rolled steel DC01, which offers aesthetically pleasing and rust-resistant properties after surface painting);
Inners: Washing machine drums, refrigerator evaporator brackets (use deep-drawn cold-rolled steel DC03, requiring curved surfaces and high plasticity);
Structural components: Microwave oven brackets, oven frames (use hardened cold-rolled steel SPCC-SD for high strength and stable support);
Reasons for using galvanized cold-rolled steel (such as SGCC): Home appliances require long-term use (5-10 years). Exposed cold-rolled steel is susceptible to rust if scratched. The zinc layer of galvanized steel provides secondary protection (zinc corrodes first in scratched areas), extending the life of the appliance (e.g., washing machine housings and air conditioner outdoor units are often galvanized).
7. What are the applications of cold-rolled steel in the electronics industry? Are there any special requirements for cold-rolled steel? Electronics Industry Applications:
Chassis/Casings: Computer chassis, router cases, and server cabinets (Use thin-gauge cold-rolled steel, such as 0.3-0.8mm, DC01 material, requiring flatness and no deformation for easy assembly);
Heat Sinks: Heat sinks for some low-end electronic devices (stamped from cold-rolled steel, nickel-plated to improve thermal conductivity, lower cost than aluminum alloy);
Connectors: Spring clips for small electronic connectors (Use hard cold-rolled steel, such as SPCC-SD, for high hardness and excellent elasticity);
Special Requirements:
High surface cleanliness (no oil or scratches to avoid compromising the insulation of electronic components);
High dimensional accuracy (e.g., chassis panel hole position deviation ≤0.1mm to ensure screw assembly);
Non-magnetic properties (some electronic devices require non-magnetic cold-rolled steel, requiring controlled alloying elements in the steel, such as reducing nickel content).