What is the density of DC02 steel?
The density of DC02 steel (grade in European standard EN 10130) is 7.85 g/cm³ (or 7850 kg/m³), which is consistent with the density of most carbon steels and low carbon cold rolled steels.
What is DC02 material grade?
DC02 is divided into the following grades according to its forming ability in the European standard:
|
Brand |
Material Grade |
Formability |
Typical Uses |
|
DC01 |
FeP11 |
General stamping (simple deformation) |
Low-complexity parts such as brackets and housings |
|
DC02 |
FeP13 |
Medium stamping |
Automotive interior parts, home appliance panels |
|
DC03 |
FeP14 |
Higher stamping performance |
Medium depth stamping |
|
DC04-DC06 |
FeP15-FeP17 |
Ultra-deep drawing (high ductility) |
Automobile fuel tanks, complex covers |
What material is DC02 equivalent to?
DC02 is a high-carbon, low-alloy cold-working die steel, with the main components of 1.0% carbon and 0.5%~1.0% chromium. Its performance is close to that of China's national standard Cr2 (GB/T 1299) or 9Cr2, and it is suitable for wear-resistant scenes such as cold stamping dies and measuring tools. International similar materials include American AISI L3, European 100Cr6 (DIN 1.2067) and Japanese SUJ2 (bearing steel). It is characterized by high hardness (HRC 60+) and wear resistance, but low toughness, and is suitable for low-impact tools and dies.
What is the difference between DC02 and DC05?
DC02 is a high carbon low alloy steel with a composition close to Cr2 (~1.0%C, 0.5%~1.0%Cr), suitable for low-load cold stamping dies, gauges, and cutting tools; DC05 is based on DC02 and adds a small amount of alloying elements (such as 0.2%~0.5%Mo or trace V) to improve hardenability and wear resistance, and is used for molds with higher wear resistance requirements (such as precision stamping dies and drawing dies).
Is DC02 mild steel?
The carbon content of DC02 is usually between 0.95% and 1.10%, while the carbon content of low carbon steel is generally less than 0.25%. DC02 is not low carbon steel, but high carbon low alloy tool steel, which is used for wear-resistant parts such as cold working dies, knives, and measuring tools.


