Galvanized steel plate is one of the most common building and manufacturing materials in the world, yet the question of what it is actually made of is answered differently depending on whether you look at the base steel, the zinc coating or the process. This article explains the material composition, the two galvanizing processes, the coating mass specifications in the international standards and the performance that buyers can expect.
Definition and Basic Composition
Galvanized steel plate is a composite material: a plain carbon steel substrate coated with zinc by a hot-dip or electrochemical process. Zinc has a low melting point of approximately 419.5 C and forms a dense protective layer with iron, effectively isolating the steel from oxygen and moisture and thereby slowing corrosion. According to ISO 3575, the zinc coating mass for galvanized steel sheet typically ranges from 10 to 275 g/m2, corresponding to roughly 1.4 to 38 micrometres of zinc, depending on the application. Construction sheet requires a zinc coating of at least 100 g/m2, about 14 micrometres, to ensure long-term outdoor weathering resistance.
Two Main Galvanizing Processes
Hot-dip galvanizing immerses the steel in molten zinc at approximately 450 C. A metallurgical reaction forms a zinc-iron alloy layer at the interface, giving a thick coating of typically 50-300 g/m2 with strong adhesion. This product is used for structural components exposed to harsh environments, such as high-voltage power pylons and bridge guardrails. Under the Chinese standard GB/T 2518, the zinc layer thickness of hot-dip galvanized steel must be controlled within plus or minus 15% of the specified value.
Electrogalvanizing, sometimes called cold galvanizing, deposits a thinner zinc layer of typically 3-20 g/m2 by electrolysis. The result is more uniform and smoother, and is often used where appearance matters, such as appliance housings and automotive interior panels. Electrogalvanized steel offers better surface quality and processability but a shorter corrosion life, typically 5-10 years compared with 20-30 years for hot-dip galvanized steel in the same environment.
| Item | Hot-dip galvanizing | Electrogalvanizing |
|---|---|---|
| Process temperature | About 450 C, molten zinc | Room temperature, electrolysis |
| Coating mass | Typically 50-300 g/m2 | Typically 3-20 g/m2 |
| Coating structure | Zinc-iron alloy interface, thick | Thin, uniform, smooth |
| Typical life | 20-30 years | 5-10 years |
| Typical use | Structures, outdoor, roofing | Appliances, auto interior |
Core Performance Advantages
The first advantage is corrosion resistance. Zinc has a lower electrode potential than iron, so it is the preferred corrosion target, giving sacrificial anodic protection: even where the coating is scratched down to the steel, the surrounding zinc corrodes first and protects the exposed area. Salt spray tests show that hot-dip galvanized sheet can withstand rusting for over 500 hours under standard conditions in a 5% NaCl solution. The second advantage is cost-effectiveness: galvanizing adds only 10-30% to the price of the steel sheet but extends service life by three to five times, significantly reducing maintenance costs. The third advantage is machinability: the zinc coating does not prevent stamping or welding, and forming grades such as DX51D+Z per EN 10346 can pass a 180-degree bend test without cracking the coating.
How to Specify Galvanized Steel Plate
A complete specification names the base steel grade, the coating designation and the standard. Common base grades are DX51D+Z under EN 10346, SGCC under JIS G3302, and Q235-type structural steel under GB/T 700. The coating designation gives the nominal zinc mass in g/m2, such as Z100, Z180 or Z275, and the dimensional tolerances are checked against the governing standard. For outdoor construction, choose Z180 or Z275; for indoor parts, Z60-Z100 is usually sufficient, and the choice of regular, minimised or zero spangle surface depends on whether the sheet will be painted.
Frequently Asked Questions
What is galvanized steel plate made of?
A plain carbon steel substrate coated with zinc by hot-dip or electrochemical galvanizing. The base is normally a low-carbon forming grade, and the zinc coating mass is specified in g/m2.
How thick is the zinc coating?
Per ISO 3575, the coating mass is typically 10-275 g/m2, about 1.4-38 micrometres. Construction sheet needs at least 100 g/m2, about 14 micrometres.
What is the difference between hot-dip and electrogalvanizing?
Hot-dip galvanizing applies 50-300 g/m2 in molten zinc at about 450 C and lasts 20-30 years outdoors; electrogalvanizing applies 3-20 g/m2 by electrolysis with a smoother surface but only 5-10 years of life.
How does the zinc coating protect the steel?
By barrier protection plus sacrificial anodic protection: zinc corrodes preferentially at scratches and cut edges, shielding the steel, and hot-dip sheet passes over 500 hours of 5% NaCl salt spray testing.
Does galvanizing affect forming and welding?
No. The coating does not prevent stamping or welding, and forming grades such as DX51D+Z pass a 180-degree bend test without coating cracks. Welding requires local coating removal or suitable ventilation.
Which standard governs galvanized steel plate in China?
GB/T 2518, which specifies the coating mass tolerance of plus or minus 15% for hot-dip galvanized steel. Internationally, EN 10346, JIS G3302 and ASTM A653 cover the same product family.

