Which Industries Mainly Use DC04 Cold Rolled Steel?

Aug 25, 2025 Leave a message

Why DC04 Is Specified for Demanding Forming

DC04 is a cold-rolled low-carbon steel grade defined in EN 10130, supplied for deep drawing applications. With a yield strength range of 130-210 MPa, a minimum elongation A80 of 38% and guaranteed anisotropy and strain-hardening parameters (r90 and n90) for thin gauges, DC04 forms predictably in multi-stage dies without excessive thinning or cracking. This combination of low strength, high ductility and consistent surface quality explains its wide industrial use.

Main Industries and Applications

Industry Typical DC04 applications
Automotive Body panels, fuel tanks, seat components, wheelhouse and floor stampings
White goods Washing machine drums and wrappers, refrigerator panels, cooker bodies
Kitchenware and holloware Cooking pots, baking trays, sinks, containers produced by deep drawing
Electrical enclosures Cabinets, meter boxes, switchgear housings formed in multi-stage presses
Building and furniture Locker bodies, shelving, radiator casings, profiled components
Metal packaging Battery casings, aerosol components, drawn cans and lids

Material Behaviour in Production

In press shops DC04 is chosen where the part drawing ratio exceeds the capability of DC01 or DC03. The low yield strength reduces springback, the high elongation allows deep cups and complex contours, and the guaranteed r90 value ensures that the sheet does not thin excessively during drawing. Because DC04 is a killed steel with controlled carbon content, it also delivers a stable surface for painting after forming, which matters for visible automotive and appliance parts.

Surface Finish and Coating Options

DC04 is available with the surface classes defined in EN 10130 (smooth, bright or matte) and with the dimensional tolerances of EN 10131. It is frequently supplied as bare cold-rolled sheet for immediate stamping, or as the base metal for hot-dip galvanized and electro-galvanized products, in which case the formability of the coated product follows the same DC grade rules in EN 10346.

Frequently Asked Questions

Is DC04 the same as SPCC?

No. DC04 is a deep drawing grade per EN 10130; SPCC is the general-purpose cold-rolled grade in JIS G3141. The deep drawing JIS grades are SPCD and SPCEN, which are closer to DC04 and DC05 respectively.

Can DC04 be used for exposed automotive body panels?

Yes. DC04 and DC05 are commonly specified for interior and exterior body stampings where the surface must remain defect-free after deep drawing and painting.

What is the former designation of DC04?

DC04 was previously designated St14 in DIN 1623 and FeP04 in older European nomenclature. The legacy term CR4 is also used in some markets.

Does DC04 need to be annealed before deep drawing?

No. DC04 is supplied in the annealed and skin-passed condition with the final mechanical properties already established by the mill. No further annealing is required by the fabricator.

What thickness range is typical for DC04?

EN 10130 covers cold-rolled products from 0.35 mm up to 3.0 mm thickness. Thicker hot-rolled equivalents such as DD13 or DD14 are used above this range.

How is the r90 value of DC04 measured?

The Lankford coefficient r90 is measured in a tensile test on a specimen cut transverse to the rolling direction; it quantifies the resistance of the sheet to thinning during drawing and is part of the optional property classes in EN 10130.