1.How does substrate thickness affect structural strength and load-bearing capacity?
Wind Pressure Resistance: In outdoor structures (such as factories, warehouses, and large venues), corrugated board with a thicker base (e.g., ≥0.4mm) can better withstand strong winds, typhoons, and other external forces, preventing dents, warping, or tearing caused by wind pressure. Thinner base (e.g., <0.3mm) is susceptible to deformation and even detachment in high wind pressure environments.
Impact Resistance and Load-Bearing Capacity: For locations requiring temporary storage of goods or potential impact from hail and falling objects (such as logistics warehouse roofs and workshop ceilings), thicker base (e.g., 0.5-0.8mm) can cushion impact energy and minimize damage. Thinner base can be easily bent by heavy objects or punctured by hail. Span adaptability: When corrugated board needs to cover a larger span (e.g., plant column spacing > 6 meters), thicker baseboards can reduce the "center droop" caused by their own weight or external loads, eliminating the need for additional supporting keels and reducing construction costs. Thinner baseboards require denser keel spacing, otherwise structural instability is likely to occur.

2.How does substrate thickness affect weather resistance and service life?
Corrosion Resistance: If the color coating is damaged by wear and scratches, the substrate is directly exposed to the elements. Thicker substrates have a greater "metal base material margin." Even if localized rust occurs, the rust penetrates more slowly from the surface to the interior, delaying the overall scrapping of the panel. Thinner substrates (e.g., less than 0.25mm) are susceptible to rapid rust and perforation once the color coating is damaged, significantly shortening the service life (possibly from 15 years to less than 5 years).
Environmental Adaptability: In regions with large temperature fluctuations and high humidity (such as the rainy season in southern China and the extremely cold regions of northern China), thicker substrates experience less thermal expansion and contraction, reducing thermal stress-induced cracking of the color coating and fatigue damage. Thinner substrates, however, are more susceptible to accelerated color coating shedding due to frequent deformation, further exacerbating substrate corrosion.

3.How does base thickness affect processing and forming properties?
Forming Suitability: Excessively thick substrates (e.g., >1.0mm) are hard, requiring greater pressure during roll forming, which can easily cause wear on the forming equipment and may not accurately fit the corrugated mold, resulting in problems such as insufficient flute height and deformed corners. Excessively thin substrates (e.g., <0.2mm) are prone to wrinkling and wavy edges during the forming process, affecting the flatness and sealing of the corrugated board.
Corrugated Structural Stability: For common V- and U-shaped corrugations, thicker substrates better maintain the three-dimensional structure of the flutes, making them less susceptible to collapse due to external forces after splicing. Corrugations formed with thinner substrates are easily deformed by pressure, affecting the board's drainage (e.g., water accumulation due to corrugation deformation) and overall load-bearing capacity.

4.How does the thickness of the base layer affect the sound and thermal insulation performance?
Soundproofing: Thicker substrates have a higher metal density, providing greater insulation against airborne sound (such as the sound of rain and outdoor noise). Thinner substrates are more susceptible to "resonance" due to sound wave vibrations, exacerbating noise transmission (for example, the "tickling" sound of thin-substrate corrugated board is more noticeable on rainy days).
Auxiliary Thermal Insulation: Thicker substrates have a relatively slow heat conduction rate (the thermal conductivity of the metal substrate is fixed, but increasing thickness can extend the heat transfer path), which can slightly improve the thermal insulation performance of the board. This is especially true in "single-layer corrugated board" applications without insulation (such as temporary sheds). Thicker substrates can reduce the heat transfer from summer solar radiation more than thinner substrates.
5.How does substrate thickness affect installation and splicing performance?
Fixing Strength: Thicker baseboards (e.g., 0.4-0.8mm) provide a larger engagement area with screws and rivets, making them less likely to loosen screws or crack due to wind or vibration. Thinner baseboards (e.g., less than 0.3mm) are more susceptible to deformation (e.g., dents around the screws) when tightening, or even penetration by the screws, compromising fixing stability.
Joint Sealing: The smoothness and fit of corrugated board surfaces are crucial for splicing. Thicker baseboards offer greater smoothness, resulting in smaller gaps at the joints and reducing the risk of rainwater seepage. Thinner baseboards are more prone to excessive gaps at the joints due to insufficient smoothness, requiring additional sealant to fill the gaps, increasing construction costs and making subsequent maintenance more difficult.

