Will surface scratches on galvanized coils affect corrosion protection?

Oct 10, 2025 Leave a message

1.What is the dual protection mechanism of the galvanized layer?

Barrier Protection: A complete zinc coating acts like a protective barrier for the steel, physically isolating corrosive media like water and oxygen from contact with the steel substrate.

Sacrificial Anodic Protection (Electrochemical Protection): This is the most unique advantage of zinc coating. Zinc is chemically more reactive than iron. When the zinc coating breaks, the exposed steel substrate and the surrounding zinc form a micro-battery in an electrolyte (such as rainwater or humid air). In this micro-battery, the zinc acts as the anode and corrodes preferentially, while the iron acts as the cathode and is protected. This protective effect persists as long as the surrounding zinc remains.

Galvanized Coil

2.How does scratch location affect corrosion protection?

Flat surfaces are relatively less affected because rainwater easily flows away and doesn't accumulate.

Bends or edges: These are stress concentration areas and prone to water accumulation. Deep scratches can initiate and accelerate corrosion.

Galvanized Coil

3.How does the use environment affect the anti-corrosion performance?

Dry inland environments: Corrosion is less severe, and even minor scratches can maintain the sacrificial protection of zinc for a long time.

Highly humid, coastal, or industrially polluted environments: Chloride ions, sulfides, and other pollutants in the environment significantly increase the corrosion rate. In these environments, any surface defect (including scratches) can become a corrosion intrusion point and must be given high attention.

Galvanized Coil

4.How to deal with the scratches afterwards?

For galvanized coils purchased as raw material, new scratches and cuts incurred during the processing of the coils into brackets (such as cutting, punching, and bending) must be repaired.

A common repair method is to spray with a zinc-rich paint with a high zinc content, using the zinc powder in the paint to continue providing cathodic protection.

 

5.What effect do deep scratches have on corrosion resistance?

The impact is significant. The barrier protection is destroyed and the device relies entirely on the sacrificial protection of the zinc layer around the scratch, which limits the protection life.