1.2 Mm Thickness Galvanized Stee Sheet/plate
1.2 Mm Thickness Galvanized Stee Sheet/plate

1.2 Mm Thickness Galvanized Stee Sheet/plate

Our galvanized steel plates conform to various international standards, including AISI, ASTM, BS, DIN, GB, and JIS, providing assurance of quality and compliance with global regulations.
Send Inquiry
Chat Now

Get a free quote! Contact us today!

Send E-mail: sale@gneegi.com

Tel: +86 15824687445

How Much Does 1.2 mm Galvanized Sheet Weigh?

 

Theoretical weight before coating:

**Weight (kg/m²) = thickness (mm) × 7.85**

For 1.2 mm: 1.2 × 7.85 = 9.42 kg/m². Add the zinc coating on top.

Thickness

Base weight (kg/m²)

With Z100

With Z275

0.8 mm

6.28

6.38

6.56

1.0 mm

7.85

7.95

8.13

1.2 mm

9.42

9.52

9.70

1.5 mm

11.78

11.88

12.06

2.0 mm

15.70

15.80

15.98

 

Sheet weights at 1.2 mm, Z275:

Sheet size

Area (m²)

Weight per sheet

Sheets per tonne

1000 × 2000 mm

2.00

19.4 kg

~51

1220 × 2440 mm

2.98

28.9 kg

~34

1500 × 3000 mm

4.50

43.7 kg

~22

Use these for freight estimates. Actual weight on the packing list governs invoicing.

 

Is 1.2 mm the Right Gauge for Your Job?

 

Gauge

Typical use

0.35 – 0.5 mm

Roofing sheet, light cladding

0.7 – 1.0 mm

Gutters, light ductwork, appliance backs

1.2 mm

Ductwork, light framing, gutters and flashings, general fabrication, container panels, guard plates

1.5 – 2.0 mm

Structural purlins, heavier fabrication

2.5 – 4.0 mm

Heavy fabrication, base plates

1.2 mm is the practical point where sheet becomes stiff enough to be self-supporting over a short span but is still easy to fold, weld and cut on a standard brake press.

 

Grades Available at 1.2 mm

 

Grade

Standard

Yield / tensile

Order it when

DX51D+Z

EN 10346

Forming grade, Rm 270–500

Bending, folding, light forming

SGCC

JIS G 3302

Commercial quality

General purpose, Asia-market specs

S250GD+Z / S280GD+Z

EN 10346

≥ 250 / ≥ 280 MPa

Light structural, studs

S350GD+Z

EN 10346

≥ 350 MPa

Purlins, structural framing

DX53D+Z

EN 10346

Deep drawing grade

Deeper formed parts

Ordering tip: if the part is bent rather than drawn, DX51D is cheaper and perfectly adequate. Specify a structural S-grade only when the design calls for a guaranteed yield.

 

Coating Choice at 1.2 mm

 

Coating

Mass both sides

Per side (approx.)

Use

Z100

100 g/m²

7 µm

Dry indoor

Z140

140 g/m²

10 µm

Light partition, indoor

Z200

200 g/m²

14 µm

General building

Z275

275 g/m²

20 µm

Outdoor building - the default

Z350

350 g/m²

25 µm

Industrial / light coastal

At 1.2 mm there is enough base metal that coating choice drives service life more than thickness does.

 

Product Specifications

 

Item

Value

Standard

AiSi, ASTM, bs, DIN, GB, JIS

Grade

ASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345

Place of Origin

China

Brand Name

Gnee

Type

Steel Plate

Technique

Hot Rolled

Surface Treatment

galvanized

Application

Container Plate

Special Use

Wear Resistant Steel

Width

2001-3000mm

Length

6001-12000mm

Tolerance

±1%

Processing Service

Bending, Welding, Decoiling, Cutting, Punching

Delivery Time

14 Days

Product Name

Carbon steel plate/sheet

Keyword

Carbon Plate

Surface

Varnish Paint, Anti Rust Oil, Hot Galvanized, Cold Galvanized, 3PE

MOQ

10 Tons

Thickness

0.2-400mm

Package

Standard Seaworth Packing

Special Use

High-strength Steel Plate

 

Send Your Requirements

product-750-750product-750-750

Products Display

 

product-750-750

 

product-750-750

 

product-750-750

product-750-750

surface customized

Packing and shipping

gi steel coils

related product 

 

product-1-1

 

Application

Mainly using low carbon steel, it requires good cold bending and welding properties, as well as certain stamping properties.

Cold-rolled steel coils are used in a wide range of applications, such as automobile manufacturing, electrical products, steel, aviation, precision instruments, canned foods, etc.

DC01, DC02, DC03, DC04, DC06, DC07, SPCC, SPCD, and SPCE grades are usually used for parts that are deep drawn with general-purpose forming knives. This is really a great way to improve our products and repairs.

Our mission should be to create imaginative products for prospects through the rich knowledge of high quality Chinese steel coil low carbon cold rolled steel coil DC01, and we sincerely look forward to cooperating with customers around the world. We believe we can satisfy you. We also warmly welcome customers to visit our company and purchase our products.

cold rolled stainless steel sheet in coil

certification

 

gi sheet roll

Customer case

Hot dipped galvanized Sheet Metal

FAQ

 

1.How much does a 1.2 mm galvanized sheet weigh?

9.42 kg/m² for the base metal, about 9.70 kg/m² with Z275 coating. A 1220 × 2440 mm sheet weighs roughly 28.9 kg.

2.What is 1.2 mm galvanized sheet used for?

HVAC ductwork, gutters and flashings, light framing, enclosures, container panels and general fabrication.

3.Which grade should I order?

DX51D+Z for bending and general work. S350GD+Z when the design needs a guaranteed 350 MPa yield.

4.What coating thickness do I need?

Z275 for outdoor building. Z100–Z140 for dry interiors. Z350 for industrial or light coastal air.

5.Can you cut to my exact sheet size?

Yes. Cut-to-length and slitting are done in-house before packing.

6.Do you supply coil as well as sheet?

Yes, in 508 mm and 610 mm IDs.

7.Is galvanized sheet weldable?

Yes, but grind the zinc off the weld zone first and ventilate properly - zinc fumes are hazardous.

Hot Tags: 1.2 mm thickness galvanized stee sheet/plate, China 1.2 mm thickness galvanized stee sheet/plate manufacturers, suppliers, factory, Galvanized Sheet, galv steel plate, metal sheet 4x8 galvanized, Hot dipped galvanized Sheet Metal, Hot Dipped Galvanised Carbon Steel Sheet, Galvanised Metal Steel Plate