Galvanized Steel

• A387 Gr 11 Plate List

  As a pressure vessel grade steel for use in elevated temperature service, is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where...

  read more
• ASTM A387 Grade 11 Alloy Steel Plate

  As a pressure vessel grade steel for use in elevated temperature service, is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where...

  read more
• Chemical Composition Of GB 3087 Grade 10

  (1)Hydraulic test The steel pipe should be hydraulically tested one by one. (2)Flattening test Steel pipes with an outer diameter of more than 22mm to 400mm and a wall thickness of not more...

  read more
• GB 3087 GRADE 10 SEAMLESS BOILER TUBES

  GB 3087 Grade 10 Seamless pipe for low and medium pressure boilers.GB 3087 Grade 10 pipe delivered in hot rolled or heat treated condition.The finishing temperature of the steel pipe delivered in...

  read more
• 15NiCuMoNb5-6-4 (WB36) High Pressure Boiler Tubes Quick D...

  Type:Seamless Steel tubes Technique: Hot rolled or cold drawn Standard: EN 10216-2 Outside Diameter: 25mm-508mm Wall thickness: 6mm-35mm Length: 6000Mm, 12000m or specified length as...

  read more
• EN10216-2 1.6368 15NICUMONB5-6-4 SEAMLESS STEEL TUBES

  15NiCuMoNb5-6-4 (diwa373, 15NiCuMoNb5, or WB36) is the material developed by mannesman company in Germany, which is used for nuclear power generating units and high parameter thermal power...

  read more
• Chemical Composition Of EN 10216-1 P265

  Upper yield strength R eH b min. for Wall Thickness T mm

  read more
• EN 10216-1 P265 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES

  EN 10216-1 P265 Tubes for two qualities TR1 and TR2 of seamless tubes of circular cross section with specified room temperature properties made of non-alloy quality steel.

  read more
• Heat Treatment Temperature Of DIN 17175 10CrMo910 Seamles...

  A thin sheet should be taken at the top end of each round or square bar ingot for a pickling test to determine if the top end is adequately cut. Ultrasonic testing can also be performed on the...

  read more
• BOILER TUBE / DIN 17175 SEAMLESS STEEL TUBES

  DIN 17175 10CrMo910 Seamless Steel Tubes may be produced by hot rolling, cold rolling, hot pressing, hot drawing or cold drawing.have a good mechanical properties at a higher temperature, up to 6...

  read more
• BOILER TUBE / ASTM A335 SEAMLESS ALLOY PIPES

  ASTM A335 Grade P11 Pipe are either hot finished or cold drawn with the finishing treatment. P11 Seamless Ferritic Alloy-Steel Pipe are reheated and furnished in the full-annealed, isothermal...

  read more
• ASTM A213 ASME SA213 SEAMLESS ALLOY-STEEL BOILER TUBES

  ASTM A213 T22 Seamless Ferritic Alloy-Steel Boiler Tubes are made by the seamless process,ASTM A213 T22 Steel Tubes for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and...

  read more