1.What is the rust-proof principle of galvanized coils?
The rust-proof principle of galvanized coils lies in the zinc layer protecting the internal steel through a "sacrificial anode" mechanism. Normally, galvanized coils themselves do not rust.
The "rust" you see typically falls into two categories:
White rust: A white powdery substance formed when zinc reacts with water and carbon dioxide in a humid, poorly ventilated environment. This is actually a corrosion product of zinc.
Red rust: Red rust only forms when the zinc layer is completely corroded away, or when the sheet metal is cut or scratched, exposing the internal steel.

2.What are the destructive effects of sandblasting?
Sandblasting (whether with steel grit, steel shot, or silica sand) is a very powerful surface treatment method designed to completely remove all coatings from a surface.
When you sandblast galvanized coils, you indiscriminately destroy the valuable, protective zinc layer and passivation film on the surface. Ultimately, you get a roll of bright, completely exposed cold-rolled sheet, not galvanized sheet.

3.What are the consequences of sandblasting galvanized coils?
Permanent loss of corrosion resistance: You have actively removed its rust-resistant "armor." This roll of material will become just like ordinary cold-rolled steel, quickly starting to rust in the air.
Wasted galvanizing costs: Galvanized coils are more expensive than cold-rolled coils of the same specifications, mainly due to the galvanized layer. Sandblasting is essentially throwing away that extra money.
Potential new problems: Improper operation or unclean abrasive during sandblasting may embed impurities into the steel surface, affecting subsequent use.

4.What is the correct way to deal with white rust or minor stains on the surface?
Correct method: Use a soft brush (such as a bristle brush) and clean water to clean. For stubborn white rust, a mild alkaline or neutral specialized cleaner can be used. After cleaning, be sure to rinse thoroughly with clean water and allow to air dry completely.
Purpose: To remove corrosion products without damaging the zinc coating.
5.What is the correct way to deal with localized red rust on cut edges or scratches?
Correct method: Carefully remove the localized red rust using hand tools (such as a wire brush or sandpaper). Then, immediately apply a zinc-rich paint or rust-preventive paint to the exposed steel.
Purpose: To locally remove rust and artificially rebuild a "zinc protective" layer.

