Can galvanized coils be transported and stored in the open air?

Oct 30, 2025 Leave a message

1.What are the causes and hazards of white rust?

Cause: This is the most significant risk. When the surface of a galvanized coil is in prolonged contact with water (rainwater, condensation) and there is no air circulation, zinc reacts with water, oxygen, and carbon dioxide to form white, porous basic zinc carbonate.

Harm: White rust not only affects appearance, but more importantly, it destroys the integrity and continuity of the zinc layer, greatly reducing its corrosion resistance. Once white rust forms, the underlying steel substrate loses effective protection and will quickly begin to develop red rust.

galvanized coil

2.What causes black spots/stains?

Dust and pollutants in open-air environments can adhere to damp surfaces, forming stubborn black spots or blemishes that affect the product's appearance.

galvanized coil

3.What causes condensate corrosion?

The temperature difference between day and night causes a "breathing effect" inside the roll material, resulting in a large amount of condensation. Because the roll material is tightly wound, this condensation is difficult to evaporate and will accumulate between the layers for a long time, leading to large areas of white rust and corrosion from the inside out.

galvanized coil

4.What are the correct methods for short-term open-air storage?

Elevation and Leveling

The galvanized coils must be elevated at least 150mm off the ground using wooden blocks (usually at least three).

Purpose: To prevent waterlogging, maintain bottom ventilation, and prevent weed growth leading to dampness.

Tight Covering

The coils must be fully covered with waterproof tarpaulin or tarpaulin, securely fastened, and effectively prevent rainwater and dew from entering.

The covering should extend below the bottom of the coil to provide effective protection.

Ensuring Ventilation

The covering should not be completely sealed; adequate ventilation openings must be left to prevent internal moisture buildup.

The coils should be placed with the "nose" (core) horizontal to prevent rainwater from flowing into the interior. Also, avoid pointing the "nose" directly at the prevailing wind direction to reduce moisture ingress.

 

5.What protective measures should a supplier or customer take?

As a supplier: When shipping, ensure the rolls have basic rust-proof packaging (such as rust-proof paper) and inform the customer of the correct storage requirements.

As a buyer: Upon receiving the goods, prioritize indoor storage. If outdoor storage is unavoidable, immediately implement the above-mentioned protective measures and use the goods as soon as possible.