1.What is harmful autoxidation?
What is it? When the surface of galvanized coils comes into contact with water or condensation for extended periods in a humid, poorly ventilated environment (such as a warehouse or shipping container), a chemical reaction occurs, forming a white, porous layer of zinc corrosion products (primarily basic zinc carbonate).
Why is it harmful?
Porosity: This layer of white rust doesn't protect the underlying metal like dense aluminum oxide does, effectively blocking the ingress of moisture and air.
Lack of protection: White rust continues to develop, gradually eroding the surface zinc layer and reducing the overall corrosion protection life.
Impact on subsequent processing: White rust can affect the adhesion of the coating, leading to quality defects if painting or plastic spraying is required.
Conclusion: This natural oxidation must be avoided, as it weakens the corrosion protection.

2.How does beneficial "oxidation" work?
Chemical Conversion: The galvanized coil passes through a specific chemical solution (usually a chromium-containing or chromium-free passivation solution).
Protective Film Formation: The solution reacts with the fresh zinc layer, forming an inactive, dense composite oxide film (conversion film) only tens to hundreds of nanometers thick.
Mechanism of Operation:
Barrier Effect: This film is extremely dense, acting like a shield to effectively isolate the zinc layer from external corrosive media (water vapor, oxygen, and chloride ions).
Self-Healing Effect (especially for chromium-containing passivation): If the passivation film is even slightly damaged, the chromate ions in the film dissolve and migrate to the damaged area, forming a protective layer again to prevent further corrosion.

3.How does passivation treatment "enhance corrosion protection"?
Significantly Extends White Rust Onset: Passivated galvanized coils can exhibit white rust resistance (typically measured in standard salt spray tests) that is two to eight times or even longer than that of untreated galvanized coils. For example, untreated galvanized sheet may show white rust in 48 hours, while chrome-free passivation can last over 120 hours, and chrome-containing passivation can last over 200 hours.
Provides a Stable, Consistent Surface: The passivation film provides a superior, more consistent base for subsequent coating (if required), improving the adhesion of paint or powder coatings.
Reduces Risks During Storage and Transportation: Even when not in immediate use, passivation provides reliable protection against damage from moisture in storage or during transportation.

4.How does harmful natural oxidation (white rust) compare to beneficial passivation treatments (artificial oxidation)?
Formation: Harmful natural oxidation is uncontrolled and occurs naturally in a humid environment; beneficial passivation treatment is controlled and artificially created through chemical treatment in the production line
Film structure: harmful natural oxidation is loose, porous and uneven; beneficial passivation treatment is dense, stable and uniform
5.What is the difference after galvanized coil goes through a controlled "oxidation treatment"?
It can greatly enhance its anti-corrosion performance, especially prevent the formation of white rust during storage and transportation. What we usually call "oxidation rust" refers to harmful natural oxidation, which needs to be avoided.

