What are the applications of DC01 steel in home appliances?
(1) Shell and panel
Washing machine/refrigerator side panel: The galvanized layer (Z60~Z120) provides anti-rust protection, and the surface can be coated or sprayed (PE/PVDF) to improve the appearance.
Microwave oven/oven shell: The part with lower temperature resistance requirements can be used directly after stamping.
Air conditioner outdoor unit cover: Passivation treatment (ZF) is required to enhance moisture resistance.
(2) Internal structural parts
Washing machine inner drum bracket: Welded after stamping, the galvanized layer prevents detergent corrosion.
Refrigerator back panel/interlayer: Lightweight and easy to clean, the zinc layer prevents condensation water from rusting.
(3) Small household appliances
Rice cooker/kettle shell: Thin plate (0.3~0.6mm) is deep-drawn, and the surface can be brushed or printed.

What steel is DC01 equivalent to?
DC01 is equivalent to DX51D (European standard) or SPCC (Japanese standard) in international standards. It is a low-carbon cold-rolled steel mainly used for stamping and forming.
DC01 galvanized steel material advantages
|
Features |
Benefits to home appliance manufacturing |
|
High formability |
Suitable for complex processing such as stamping and bending (such as curved panels) |
|
Corrosion resistance |
Galvanized layer resists moisture, sweat or detergent erosion |
|
Surface quality |
High finish, can be directly sprayed or coated for decoration |
|
Controllable cost |
Lower than stainless steel, suitable for mass consumer products |
Technical parameter requirements for home appliance applications
Base material (DC01):
Tensile strength 270~410 MPa, elongation ≥28% (to ensure no cracking during deep drawing).
Coating:
Conventional zinc layer Z60~Z120 (single-sided 60~120g/m²), must pass the salt spray test (such as no red rust in 48h).
Surface treatment:
Passivation (ZF), oiling (ZO) or fingerprint resistance treatment (applicable to touch screen home appliances)
Can DC01 galvanized steel replace stainless steel?
It cannot be completely replaced. The corrosion resistance and life of stainless steel far exceed those of galvanized steel, but the cost is more than 3 times higher. In non-harsh environments (such as ordinary household appliance housings), DC01+Z60/Z80 is sufficient.


