How long can the corrosion resistance of galvanized coils last after passivation treatment?

Sep 10, 2025 Leave a message

1.How do the passivation process and film quality affect the duration of corrosion resistance?

Traditional chromate passivation: Once the industry mainstream, the passivation film (containing a Cr³⁺/Cr⁶⁺ composite layer) is dense and self-healing (it can be repaired after minor scratches). This significantly extends the life of the galvanized coating under normal conditions, offering corrosion resistance 3-5 times higher than unpassivated galvanized coils.
Chromium-free passivation (such as silane passivation, titanate passivation, and phosphate passivation): While environmentally friendly, the film's self-healing ability is weaker, resulting in a lifespan that's generally slightly lower than chromate passivation (approximately 70%-90% of that). However, high-quality chromium-free processes (such as silane + sealer combinations) can approach chromate levels.
Passivation film thickness and uniformity: Excessively thin films (<5nm) or localized coating gaps can result in "protection holes" and significantly shorten the coating lifespan. A uniform passivation film with a thickness of 8-15nm provides superior, long-lasting protection.

Galvanized Coil

2.How does the corrosiveness of the operating environment affect the corrosion resistance time?

Mildly corrosive environments: Dry indoor environments (such as office ceilings and furniture panels) and outdoor environments away from industrial pollution (such as rural building exteriors) are low in corrosive media (Cl⁻, SO₂, and humidity). The passivation layer can remain stable for a long time, with a lifespan of 5-15 years.
Moderately corrosive environments: Urban outdoor environments (containing small amounts of vehicle exhaust and dust) and building exterior panels in non-coastal areas (such as balcony railings and air conditioner exterior casings). With moderate humidity and minor pollutants, the lifespan is typically 2-5 years.
Severely corrosive environments: Coastal areas (high salt fog), industrial areas (exhaust gas and wastewater containing SO₂ and Cl⁻), and damp basements or kitchens (high humidity and oil pollution). Corrosive media can quickly penetrate the passivation film, and the lifespan may be as short as 3 months to 2 years.

Galvanized Coil

3.What impact do subsequent processing and protective measures have on service life?

The treatment method after passivation directly affects the lifespan:

If subsequent painting or lamination is performed (such as the "passivation + primer + topcoat" combination for color-coated steel sheets), the passivation layer acts as a base layer to enhance coating adhesion, extending the overall protective lifespan to 10-20 years (e.g., color-coated galvanized steel coils for construction).

If exposed directly (without additional protection) and subjected to prolonged friction and impact (such as mechanical parts), the passivation film is easily damaged, shortening the lifespan by over 50%.

Galvanized Coil

4.What are the differences in salt spray test results for different passivation process types?

Unpassivated galvanized coil: 24-72 hours
Standard chrome-free passivation (silane): 120-240 hours
High-quality chrome-free passivation (with sealer): 300-500 hours
Traditional chromate passivation: 500-1000 hours

 

5.What are the methods to extend the corrosion resistance of passivated galvanized coil?

Choose a passivation process that matches the environment: "Chromium-free passivation + sealer" or traditional chromate passivation (which must meet environmental requirements) is preferred in coastal areas. Standard chromium-free passivation is acceptable for dry indoor environments.

Adding subsequent protection: For exposed applications, a clear coat can be applied (such as appliance housings). For outdoor use, a "passivation + color coating" composite coating can be selected.

Periodic maintenance: For passivated galvanized parts exposed outdoors (such as guardrails), clean the surface of dust and oil every 1-2 years. Apply a rust inhibitor if necessary to extend the lifespan by 30%-50%.