How to test the surface roughness of galvanized coils?

Oct 31, 2025 Leave a message

1.What is the working principle of contact measurement?

An extremely fine diamond stylus (typically with a tip radius of 2 or 5 micrometers) moves across the workpiece surface at a constant speed, driven by a sensor. The vertical undulations of the surface profile cause displacement of the stylus, which is converted into an electrical signal. After amplification, filtering, and digital processing, various roughness parameters are calculated.

galvanized coil

2.What are the test steps for contact measurement?

Sampling: Cut a representative sample from the galvanized coil.

Preparation: Place the sample stably on the worktable, ensuring the surface to be measured is flat, clean, and free of oil and dust.

Calibration: Calibrate the instrument using a standard template to ensure measurement accuracy.

Parameter Setting: Set measurement conditions, such as cutoff wavelength (λc), evaluation length (Ln), and sampling length (Lr). For galvanized sheet, a commonly used cutoff wavelength is 0.8 mm.

Measurement: Gently touch the stylus to the sample surface to initiate the measurement. Typically, at least three measurements are taken at different locations in the transverse direction (perpendicular to the rolling direction) of the sheet, and the average value is recorded.

Reading and Recording: The instrument automatically calculates and displays the roughness parameters; record the results.

galvanized coil

3.What are the advantages and disadvantages of contact measurement?

Advantages:

High Precision: Accurate and reliable measurement results.

Standardization: Complies with international (ISO), national (GB/T), and industry standards.

Direct Measurement: Directly obtains profile curves and authoritative parameters.

Disadvantages:

Contact Damage: The diamond stylus may leave slight scratches on the extremely soft galvanized surface (usually invisible to the naked eye).

Slow Speed: Not suitable for high-speed online inspection.

High Environmental Requirements: Requires a stable laboratory environment.

galvanized coil

4.What are the working principles and methods of optical interferometry?

Working Principle: Utilizes the principle of light wave interference, such as white light interference or phase-shifting interference. When a light beam illuminates a surface, the reference light and the reflected light interfere, forming interference fringes. By analyzing the morphology of the fringes, the three-dimensional morphology of the surface can be reconstructed.

Applications: Primarily used for high-precision 3D surface analysis in laboratories, providing 3D parameters such as Sa (arithmetic mean surface height). Speed ​​and cost limit its widespread application in production lines.

 

5.What are the working principles and applications of laser scattering?

Working Principle: A laser beam is irradiated onto the material surface at a fixed angle. The scattering characteristics of the reflected light are directly related to the surface roughness. The smoother the surface, the weaker the scattering and the stronger the specular reflection; the rougher the surface, the stronger the scattering. By analyzing the intensity distribution or contrast of the scattered light, the roughness value can be indirectly calculated.

Application: This is currently the mainstream technology for online roughness inspection. The sensor is installed on the production line, allowing for real-time, non-destructive monitoring of the roughness of each steel coil.