1.Why is it not recommended to use ordinary galvanized coils directly as panels for outdoor advertising light boxes?
Completely Opaque
The core function of an advertising lightbox is to allow internal light to diffuse evenly and softly to display the image. Galvanized coils are solid metal sheets and are completely opaque. If forced to use them, you can only attach the advertising image to the outside of the panel and rely on external lighting, thus losing the core advantages of the "lightbox"-internal illumination and vibrant, eye-catching colors-significantly diminishing the effect.
Surface Treatment and Aesthetic Issues
Basic galvanized surfaces are unsuitable for printing: The surface of ordinary galvanized sheets is composed of zinc flower crystals. Although there is a passivation film, it is not designed for direct printing. Paint or inkjet printing may not adhere well and is prone to peeling.
Monotonous Appearance: Galvanized coils are typically silver-gray, with a monotonous and unattractive appearance. Even with painting, the surface smoothness may not be ideal for high-end advertising images.
Prone to White Rust: In humid outdoor environments, if galvanized sheets are scratched or exposed to prolonged damp conditions, white "zinc salts" (white rust) may form, affecting the aesthetics.
Reflection Issues
The metallic luster of galvanized steel sheets can cause strong specular reflections under sunlight, resulting in light pollution and potentially obscuring advertising images at certain angles due to glare.
Processing and Maintenance
Cutting Burrs: The edges after slitting and cutting are very sharp, posing a safety hazard and requiring additional deburring treatment.
Limited Corrosion Resistance: While the galvanized layer provides some rust protection, its lifespan is far shorter than materials specifically designed for outdoor use in coastal areas or industrial cities with severe acid rain. Once the galvanized layer is damaged, the substrate will rust rapidly.

2.If we insist on using it, what kind of treatment is needed?
Surface Treatment: Sandblasting or phosphating is necessary to increase paint adhesion, followed by the application of a high-quality outdoor-grade primer and topcoat. White is the preferred topcoat color to act as a reflective layer, enhancing internal light reflection efficiency (though the effect is still far less than with translucent materials).
Structural Design: It cannot be used as a single, large-area lightbox panel, but only as a back panel or side panel. Translucent panels still require the use of specialized translucent materials.
Rust Prevention and Sealing: All seams and cut edges must be properly sealed with sealant to prevent moisture intrusion.

3.What are the advantages of using a PC board as a replacement?
Advantages: High light transmittance, extremely strong impact resistance (anti-smashing and anti-vandalism), good weather resistance (UV coating to prevent yellowing), lightweight, and easy to process.
Applications: The first choice for high-end outdoor light boxes and bus stop light boxes.

4.What are the advantages and disadvantages of using PMMA boards as a substitute?
Advantages: Better light transmittance than PC sheets, higher surface gloss, vibrant and rich colors, and good weather resistance.
Disadvantages: Less impact resistant than PC sheets, relatively fragile.
Applications: Widely used in various indoor and outdoor signs and light boxes.
5.What are the advantages and disadvantages of using aluminized zinc plate or color-coated plate as a substitute?
If you desire the strength and texture of metal for the lightbox frame or back panel, consider using pre-coated steel sheets. These are galvanized sheets pre-coated with a colored paint layer, offering far superior corrosion resistance and appearance compared to ordinary galvanized sheets, and a wide range of color options. However, they are also opaque and can only be used for structural components.

