Q235 10m Steel Double Arm Powder Coated Street Light Pole with Good Price

Jan 20, 2026 Leave a message

What are the factory inspection items for Q235 steel plates?

A: Mandatory inspection items: chemical composition (spectral/chemical analysis), mechanical properties (yield strength, tensile strength, elongation), cold bending test; Q235B/C/D requires additional impact testing; surface quality and dimensional deviation are tested as needed.

How to distinguish genuine Q235 steel plates from counterfeits?

A: Chemical composition can be tested using a spectrometer, and mechanical properties can be tested using a tensile test. Simultaneously, verify the steel mill's material certificate (quality assurance certificate). The material certificate must include the furnace batch number, grade, test data, and the steel mill's official seal.

What are the common packaging methods for Q235 steel plates?

A: Thin/medium-thick plates: bundled packaging, 5-10 tons per bundle, with corner protectors and stretch film, labeled with grade, thickness, specifications, and furnace batch number; Thick plates: single/multiple sheets unpackaged, spray-painted markings, suitable for sea/land transportation.

What are the commonly used equivalent standards for Q235 steel plates in foreign trade exports?

A: GB/T 700 Q235B is approximately equivalent to ASTM A36 (American standard), EN 10025 S235JR (European standard), and JIS G3101 SS400 (Japanese standard). When quoting prices for foreign trade, the equivalent standard can be specified according to customer requirements.

What are the commodity inspection requirements for Q235 steel plates exported?

A: As it belongs to ordinary carbon steel, there are no special commodity inspection requirements. Only a material certificate, packing list, commercial invoice, and customs declaration are needed. Some countries require a certificate of origin (CO).

What are the core factors affecting the price of Q235 steel plates?

A: Core factors include: raw material iron ore/coke prices, steel plate thickness (thicker plates are more expensive), standard length (non-standard lengths incur additional charges), purchase quantity, freight, and exchange rate (for foreign trade). Furthermore, Q235D, due to its higher processing requirements, is more expensive than grades A/B/C.